Panasonic KX-FPG381 Intercom, Making intercom calls, Answering intercom calls

Page 47

3. Telephone

3Press {MENU}.

4If a name is required, enter up to 16 digits for the name (page 30).

5Press {SET}.

LTo edit a number, see page 38.

6Press {SET}.

Note:

LTo print the Caller ID list, see page 93.

3.13 Intercom

The intercom feature makes it possible to have conversations between handsets and with the base unit, without using the telephone line. To make an intercom call, one extension must page (summon) the other by entering its extension number, shown in the top right of each display. The base unit’s extension number is 0, and only the base unit can page all handsets at once. The extension number of the included handset is 1.

LKeep the front cover page open for button locations.

3.13.1 Making intercom calls

Handset

1Press {INTERCOM/TRANSFER}.

2To page the base unit, press {0}.

LThe base unit will beep for 1 minute. L To stop paging, press {OFF}.

To page another handset, enter its extension number using a dialing button ({1} to {8}).

LThe destination handset will beep for 1 minute.

3When the paged party answers, talk into the handset.

L You can switch to the speaker by pressing {SP-PHONE}. To switch back to the receiver, press {TALK}.

4To end the intercom, press {OFF} or place the handset on the charger.

Base unit

You can also locate a misplaced handset by paging it (Handset locator).

1Press {LOCATOR/INTERCOM}.

2To page one handset, enter its extension number using a dialing button ({1} to {8}). L The handset will beep for 1 minute.

L To stop paging, press {DIGITAL SP- PHONE} or {LOCATOR/INTERCOM}.

To page all handsets, press {0}.

LAll handsets will beep for 1 minute.

LYou can talk with the handset user who answers first.

3When the paged party answers, talk into the microphone.

4To end the intercom, press {DIGITAL SP- PHONE} or {LOCATOR/INTERCOM}.

3.13.2 Answering intercom calls

Handset

When a handset is being paged, it will beep and display the paging extension’s number.

Example: Base unit is paging handset 1

PRIVACY

1Press {TALK}, {SP-PHONE}or

{INTERCOM/TRANSFER} to answer the page.

2To end the intercom, press {OFF} or place the handset on the charger.

Base unit

When the base unit is being paged, it will beep and display the paging extension’s number.

Example: Handset 1 is paging

CALL FROM

 

[ 1

]

1Press {LOCATOR/INTERCOM} or

{DIGITAL SP-PHONE}to answer the page.

2To end the intercom, press {DIGITAL SP- PHONE} or {LOCATOR/INTERCOM}.

Note:

L When the ringer volume is OFF (page 27, 28), the handset and the base unit will ring at the low level when paged.

During an intercom call

LIf you have difficulty hearing the other party, decrease the speaker volume.

LIf you receive a phone call while talking on the intercom, you will hear 2 tones (feature #73 on page 72, or page 74). To answer the call, if you are using the handset, press {OFF}, then press {TALK} or {SP- PHONE}. If you are using the base unit, press {DIGITAL SP-PHONE}twice.

45

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Operating Instructions Open How to use the operating instructionsNavigator, LOUD/SEARCH F Location of controlsButtons Listed in alphabetical order ButtonsTrademarks Thank you for purchasing a Panasonic fax machineFor your future reference Energy StarNever install telephone wiring during a lightning storm Important safety instructionsBattery Operating distance and noise Battery chargeFor best performance Directory Machine102 101Quick start sheet Included accessoriesPart number*1 Quantity Specifications Power cordTo place an order online for customers in the U.S.A. only Accessory informationOverview Base unitHandset Description of base unit buttonsDescription of handset buttons Description of handset display Description of base unit displayIntroduction and Installation Open the front cover 1 by pulling up the center part Installing the ink filmInk film Turn Tight Replacing the ink filmTo use A4 size paper Paper trayRecording paper Belt clip Battery installationBattery replacement To connect an optional headset to the handset To switch to the speakerphone while using the headsetHeadset optional To attach the belt clip To remove the belt clipTo a single telephone line jack Using surge protectorsConnections Charger unit45 cm 31/32 For Fax Advantage assistance, call Wall mounting the chargerBattery life Battery chargeBattery strength Handset display Battery strengthPress SET Selecting the way to use your fax machineStop Menu Your situation How to setupHow to receive calls Case 1 TAM/FAXSET Case 3 TEL only Preparation Case 4 FAX only How to receive faxesSpeaker volume Adjusting handset volumeRinger volume Handset receiver volumeAnswering machine volume Adjusting base unit volumeFax voice guidance volume Save Using the handsetUsing the base unit Date and timeTo correct a mistake For Caller ID service usersYour logo Example 1015 PM 12 hour clock entryTo enter your logo Example Bill To select characters using a or BButtons Characters O M N O Display order of characters Delete buttonEnter the correct number Your fax numberRegistration of additional handsets Example +234Press the right soft key OK Being used. Registration must be completed within 1 minuteHandset display shows the instructions as follows Base unit Press Mute HandsetSP-PHONE HOLD/CLEAR PAUSE/REDIAL Making phone callsOFF SP-PHONE Answering phone callsHOLD/CLEAR Digital SP-PHONE Mute REDIAL/PAUSETo select characters with the dialing button Buttons Setting is OFF. To activate this feature, seePress Digital SP-PHONEand talk into the microphone HOLD/CLEAR CONF/FUNCTIONClear Making a phone call using the navigator directoryTo search for a name by initial To cancel erasing, press Press HOLD/CLEAR again Press OFFEditing a stored item Erasing a stored itemFrom the base unit to a handset Copying the directoryFrom a handset to the base unit or another handset How Caller ID is displayed Caller ID serviceIf the same person calls more than once Viewing and calling back using caller informationDial Edit Make sure the handset is not being used What , means FAX/START Digital SP-PHONE Erasing all caller information Caller ID number auto edit featureUsing the handset Make sure the handset is not being used Erasing caller informationInto the base unit Storing caller information into the navigator directoryInto the handset Erasing specific caller informationAnswering intercom calls IntercomMaking intercom calls INTERCOM/TRANSFER Transferring a callTo transfer a call from the handset To transfer a call from the base unitLOCATOR/INTERCOM To join a conversation Call share featureConference Call shareMonitoring a room Room monitor featureTurning on the room monitor feature Handset Turning on the room monitor feature Base unitTo answer a call To turn the 2-way radio mode onTo turn the mode OFF To call another handsetFAX/START Digital SP-PHONE SET REDIAL/PAUSE Sending a fax manuallyDocuments you can send Sending a fax using the navigator directoryErasing a stored item from the broadcast memory Broadcast transmissionProgramming items into the broadcast memory Adding a new item into the broadcast memoryTo send the same document to a one-time group of items Activating TEL modeTo cancel broadcast transmission Receiving a fax manually Auto Answer OFFReceiving a fax automatically Auto Activating TAM/FAX modeReceiving a voice message and fax document in one call Activating FAX only modeHow to receive calls Changing the ring setting in TAM/FAX modeRing pattern Settings Distinctive Ring service from your phone companyUsing two or more phone numbers on a single telephone line Activating the Distinctive Ring featureOther triple ring short-short Long rings Programming the ring pattern assigned for faxMaking a copy More copying features86% Setting Recording Original Paper size Document Size 100%Default 92%Caller’s recording time Mailbox featuresWhen a caller calls To use a mailboxGreeting Stop Erase Recording your greeting messageErasing your recorded greeting message Pre-recorded greeting messageTransfer Stop Erase Mailbox Digital SP-PHONE Leaving a message for others or yourselfListening to recorded messages To play back messagesTransferring a call to a mailbox Erasing recorded messagesSP-PHONE OFF Remote operation with the handsetListening to recorded messages Dial PlayeditRemote operation using the direct commands Summary of remote operation Operating from a remote locationSlow talk message playback During playback Turning on the Auto Answer modeRemote operations following voice menu Interrupting remote operationBase unit programming Basic featuresProgramming basic features Programming advanced featuresAdvanced features Code #25 Sending a fax at a specific time Code #26 Setting the Caller ID list to print automaticallyCode #31 Activating the Distinctive Ring feature Code #34 Setting the quick scanCode #51 Setting the mailbox 2 password Code #44 Setting the memory reception alertCode #46 Setting friendly reception Code #47 Setting the fax voice guidanceCode #73 Setting incoming call tone Code #62 Setting line modeCode #67 Setting the incoming message monitor Code #72 Setting flash timeMain menu Sub-menu Handset programmingFunction menu table Programmable functionsSetting dialing mode Setting ringer tone for external callsSetting incoming call tone Setting auto talk featureScroll to Initial setting by pressing v or e, and press Pulse For rotary pulse dial serviceSetting the flash time Setting line modePress the right soft key Save Press OFF Setting the mailbox 2 or 3 passwordSetting the room monitor feature HOLD/CLEAR, and enter Canceling the handset registrationRe-registering the handset Make sure the handset and the base unit are not being usedExample Extension number Error messages Display Error messages ReportsRemaining film is low. Prepare a new film Film is empty. Replace the film with a new OneUnit is too hot. Let the unit cool down Recording paper jam occurred. Clear the jammed paperSP-PHONEor Digital SP-PHONE Registered to the base unit, seeGeneral When a function does not work, check hereInitial settings Cordless handset Cannot receive documents by pressing *#9 on the handset Handset stops working while being usedCannot store an item in the navigator directory Cannot redial by pressing PAUSE/REDIALFax receiving Fax sendingAnswering machine CopyingDisplay will show the following If a power failure occursWhen the recording paper has jammed in the unit Recording paper jamsWhen the recording paper was not fed into the unit properly Document jams sending Document feeder cleaningDo not use paper products, such as paper towels or tissues Thermal head cleaningHelp Reference lists and reports Base unit only Technical data about this product Security codes Paper specificationsFrequency Standby Approx .8 W Maximum Approx .0 W 5C 40C 41F 104FDimentions 225/32 Approx g 0.21 lbFCC and Other Information FCC RF Exposure Warning Laser Facsimile Limited WarrantyFAX categories Parts Labor Thermal Transfer Facsimile100 Customer Services directory #77 Auto Answer Index103 Panasonic FAX Advantage Program No Extra Cost
Top Page Image Contents