
8. Programmable Features
7.Enter the fax number.
8.Press {SET}.
9.Enter the transmission start time.
LPress {*} repeatedly to select “AM” or “PM”.
10.Press {SET}.
11.Press {MENU}.
Note:
LTo cancel after programming, press {STOP} then {SET}.
{#}{2}{6} Setting the Caller ID list to print automatically
AUTO CALL. LIST
MODE=OFF [±]
{1} “ON”: The Caller ID list will be printed automatically each time the base unit logs 30 different callers (page 39).
{2} “OFF” (default): The Caller ID list will not be printed, but the base unit will keep a record of the information for the last 30 different callers.
{#}{3}{1} Activating the Distinctive Ring feature
DISTINCTIVE RING
MODE=OFF [±]
{1} “ON”
{2} “OFF” (default) See page 55 for details.
{#}{3}{2} Setting the ring pattern for fax (Distinctive Ring feature)
FAX RING PATTERN
{1} “A” {2} “B” {3} “C” {4} “D”
{5}
{#}{3}{4} Setting the quick scan
QUICK SCAN
MODE=OFF [±]
This feature is helpful when you want to remove the document for other uses, because the unit will release the document before sending or copying.
{1} “ON”: The unit will scan the document and store it into memory first, then the unit will start sending or copying.
{2} “OFF” (default): Deactivates this feature.
Note:
LIf the document exceeds the memory capacity, sending of the whole document or copying of the exceeded document will be canceled and this feature will be turned OFF automatically.
{#}{3}{6} Receiving oversized documents
RCV REDUCTION
MODE=92% [±]
If the size of the document sent by the other party is as large as or larger than the recording paper, the unit can reduce the document and print it. Select the desired reduction rate.
{1} “72%” {2} “86%”
{3} “92%” (default) {4} “100%”
Setting | Recording | Original |
| paper size | document |
|
| size |
“100%” | Legal | Letter, A4 |
| A4 | Letter |
|
|
|
“92%” | Letter | Letter |
(default) | Legal | Legal |
| ||
|
|
|
| A4 | A4 |
|
|
|
“86%” | Letter | A4 |
“72%” | Letter | Legal |
| A4 | Legal |
|
|
|
Note:
LThe information of the sending party is printed on the top of each page. Therefore, even if the original document is the same size as the recording paper, the document will be divided into 2 sheets when printed at “100%”. Select “92%” to print on 1 sheet.
{#}{3}{9} Changing the base unit display contrast
LCD CONTRAST
MODE=NORMAL [±]
{1} “NORMAL” (default): For normal contrast.
{2} “DARKER”: Used when the display contrast is too light.
Note:
LTo change the handset display contrast, see page 76.
71