Remote Operation
Operating from a remote location!
The following operations can be performed from a remote location using a touch tone telephone.
Program the remote operation ID (feature #11 on page 81) and set the unit to TAD/FAX
mode before going out (p. 62).
Dial key | Remote command | Page |
|
|
|
0 | Skips the greeting message | 71 |
|
|
|
1 | Repeats a message | 70 |
|
|
|
2 | Skips a message | 70 |
|
|
|
4 | New message playback | 70 |
|
|
|
5 | All message playback | 70 |
|
|
|
6 | Room monitor | 71 |
|
|
|
7 | 71 | |
|
|
|
9 | Stops | 71 |
message |
| |
|
| |
|
|
|
Dial key | Remote command | Page | |
| 4 | Erases a specific message | 71 |
| 5 | Erases all messages | 71 |
8 | 0 | Changes to TEL mode | 71 |
8 | 1 | Turns ON message transfer | 71 |
8 | 2 | Turns OFF message transfer | 71 |
8 | 3 | Turns ON pager call | 71 |
8 | 4 | Turns OFF pager call | 71 |
Remote operation card
Please cut out and carry this card for assistance when using the remote operation.
Mailbox Remote Operation
Notice of Remote Operation
■Recording a message in a mailbox:
1.Call your unit.
2.Press and the mailbox no. ( 1 or 2 ).
3.Leave a message.
■Retrieving messages from a mailbox:
1.Call your unit.
2.Press and the mailbox no. ( 1 or 2 ).
3.Enter the mailbox
password .
4.Press the remote
command key (see the reverse side).
● 8 1 , 8 2 , 8 3 and
8 4 cannot be used.
Fold here
●The remote operation is available only from a touch tone telephone when the unit is in TAD/FAX mode.
●When the unit is in TEL mode, call your unit and wait for 10 rings. The answering device will temporarily answer the line. Enter the remote operation ID during the greeting message.
The unit will switch to TAD/FAX mode.
●When you press a key, press firmly.
●To send a document, press
9 . When a fax tone is heard, start transmission.
69