Panasonic KX-FHD332 manual Copying, Quick scan feature, To stop copying

Making a copy

Document guides

{>}{+}{-} {STOP} {COPY}

{START}

1 Adjust the width of the document guides to the size of the document.

2 Insert the document (up to 10 pages) FACE DOWN until a single beep is heard and the unit grasps the document.

Copying

STANDARD

PRESS NAVI.[+ -]

3 If necessary, press {+} or {-}repeatedly to select the desired resolution.

4 Press {COPY}.

NUMBER=1

COPY:PRESS START

b

NUMBER=1

OR PRESS NAVI. )

LIf necessary, enter the number of copies (up to 50).

5 Press {START}.

LThe unit will start copying.

Note:

LAny transmittable document can be copied (page 45).

To select the resolution

Select the desired resolution according to the type of document.

–“FINE”: For printed or typewritten originals with small printing.

–“SUPER FINE”: For originals with very small printing.

–“PHOTO”: For originals containing photographs, shaded drawings, etc.

LIf you select “STANDARD”, copying will be done using “FINE” mode.

Quick scan feature

This feature is helpful when you want to copy the document, then take it for other uses. To use this feature, activate feature #34 on page 61.

LThe document will be fed into the unit and scanned into memory. The unit will then print the data.

If the document exceeds the memory capacity, copying of the exceeded document will be canceled and this feature will be turned off automatically.

To stop copying

Press {STOP}.

55