Panasonic KX-FHD332 manual Convenient way of copying

Page 56

Copying

Convenient way of copying

To enlarge a document

1.Press {>} after step 4 on page 55.

ZOOM 100% [+ -] <COLLATE>)

2.Press {+} to select “150%” or “200%”, then press {START}.

LThe unit will only enlarge the center of the upper part of the document. To make an enlarged copy of the bottom of the document, turn the document around, and then make a copy.

Example: 150% enlarged copy

Original document						Enlarged copy
		A	B				A	B
		C	D				C	D
							C	D

To reduce a document

1.Press {>} after step 4 on page 55.

ZOOM 100% [+ -] <COLLATE>)

2.Press {-}to select “92%”, “86%” or “72%”, then press {START}.

L See the following table for the recommended reduction rates.

Setting	Recording	Original
	paper size	document
		size

100%	Letter	Letter
(default)	Legal	Letter, A4,
	Legal	Letter, A4,
		Legal
	A4	A4, Letter
92%	Letter	A4
86%	Letter	A4
72%	Letter	Legal
	A4	Legal

Letter = 216 mm ⋅ 279 mm (81/2" ⋅ 11")

Legal = 216 mm ⋅ 356 mm (81/2" ⋅ 14") A4 = 210 mm ⋅ 297 mm (81/4" ⋅ 1111/16")

Example: 72% reduced copy

Original document				Reduced copy
	A	B				A	B
	C	D				C	D
	C	D

Note:

LIf the appropriate reduction rate is not selected, the document may be divided and

the top of the second sheet will be deleted.

LIf the image at the bottom of the document is not copied when you copy a document that is the same length as the recording paper, try 92% or 86%.

56

Image 56

Contents Operating Instructions Compact Plain Paper Fax and CopierFor your future Reference Energy StarTrademarks CopyrightSafety instructions Important safety instructionsNever install telephone wiring during a Lightning storm Wet locations Never touch uninsulated telephone wires orTable of Contents Table of Contents Accessories Included accessoriesPart No. PFJA1030Z Part No. PFJXE0805Z orAccessory information Model No Specifications/UsageFinding the Controls Location of controlsDisplay One-touch keysRear view OverviewFront view Installation Ink filmOpen the front cover by pulling up the center part Open the back coverTurn the gear of blue core in the direction of the arrow To use A4 size paper Paper trayTo use legal size paper Document tray Handset Attach the document tray into the slots onRecording paper To add paperConnections and Setup Connecting to a telephone line jack and power outletUsing surge protectors Selecting the way to use your fax machineTelephone wiring image House or office Your situation ConnectionsYou wish to use the fax machine and your Answering machine in the same roomHow to set up How to receive callsIf the answering machine is turned off With the fax machineCase 2 One line used for fax only How to set up How to receive calls Fax machine will receive it automaticallyTelephone wiring image in house or office TEL Mode Telephone wiring image in house or office Connections Your situationFAX TEL Voice mail Connections and Setup Single telephone line Phone number Fax Computer machine EXT. in USE Help Button Help functionVolume Adjusting volumeRinger volume Handset receiver volumeDate and time, your logo and fax number Setting the date and timeInitial Programming Setting your logo Example BillTo change capital or lower-case letters To delete a characterKeys Characters To select characters using + or Display order of charactersTo select characters with the dial keypad To delete a number Setting your fax numberExample +234 Automatic Dialing Storing names and telephone numbers into one-touch dialStoring names and telephone numbers into navigator directory Editing a stored entry Press Menu ExampleTo cancel erasing, press Stop Press SET Erasing a stored entryPress + or -displayed Example Until the desired entry is Stored name and number are erasedUsing one-touch dial Using the directoryPress Monitor or lift the handset Press the desired station keyCaller ID service from your phone company To confirm caller information using Caller ID listCaller ID How Caller ID is displayedViewing and calling back using caller information Press Caller IDTo stop viewing To edit the telephone number for calling backTo cancel erasing, press STOP, then Erasing caller informationErasing all caller information Erasing specific caller informationFor navigator directory To select the resolution Sending FaxesSending a fax manually To redial the last number Press REDIAL/PAUSEPress FAX/START Sending from memory Quick scan feature To transmit more than 10 pages at a timeConvenient way to send a fax To stop transmissionDocument weight Documents you can sendMinimum size Maximum size Effective scanning areaSending a fax using one-touch dial and navigator directory Using stationsUsing navigator directory Fax auto redialBroadcast transmission Programming entries into the broadcast memoryPress Broadcast Program entriesAdding a new entry into the broadcast memory Press + or -until the following is displayedStation Example Example NikkiErasing a stored entry in the broadcast memory Example BOBTo cancel the broadcast setting To send the same document to more than one party only onceActivating TEL mode Receiving FaxesReceiving a fax manually To stop receivingFax documents Activating FAX only mode How to receive callsReceiving a fax automatically Using two or more phone numbers in a single telephone line Activating the Distinctive Ring featureDistinctive Ring Press #, thenProgramming the ring pattern assigned for fax Ring pattern SettingsIf you use three or more phone numbers To stop copying Quick scan featureCopying Convenient way of copying Example Making 2 copies of a 4-page original document To collate multiple copiesPress + or -repeatedly until the following is displayed Features Summary Programming method for basic featuresTo cancel programming ProgrammingProgramming method for advanced features Basic features Advanced features Code #40 Setting the silent detection Code #44 Setting the memory reception alertCode #46 Setting the friendly reception Code #36 Receiving oversized documentsCode #76 Setting the connecting tone Connecting Tone MODE=ON ±Error Messages Communication Error Code 40-42, 46-72, FFCommunication Error Code 43 ERROR-NOT Your Unit Code 54, 59Display Press SET to clear the messageBack cover is open. Close it Remaining film is low. Prepare a new filmTransmission error occurred. Try again Recording paper jam occurred. Clear the jammed paperFrequently Asked Questions When a function does not work, check hereGeneral Fax sendingReceiving mode Fax receivingCopying Using an answering machineIf a power failure occurs Replacement Remove the stoppers and tags from the new ink filmDotted area Back cover Front cover Display When the recording paper has jammed in the unit JamsRecording paper jam Remove the jammed recording paperAround the blue core When the recording paper was not fed into the unit properly Document jams sending Close the front cover securelyCleaning Do not use paper products, such as paper towels or tissuesConnect the power cord and the telephone line cord Document feederThermal head Correct Printed Reports Reference lists and reportsCaller IQ Feature OpenLCR service for the Caller IQ featureTo turn the Caller IQ feature From on to OFFTo turn the Caller IQ feature from OFF to on Updating the rate table downloading the rate tableSet the Caller IQ feature to on by referring to During downloadOr sending/receiving a document Automatic downloadSpecifications Technical data about this productPaper specifications Recording paper sizeFCC and Other Information FCC and Other InformationFCC and Other Information Limited Warranty Panasonic Facsimile Product Limited WarrantyFAX categories Parts Labor Thermal Transfer FacsimileWarranty For product serviceCustomer Services Customer Services directoryBasic features Advanced featuresIndex Program indexRing setting Navigator directoryOne-touch dial ReportsPanasonic FAX Advantage Program PFQX1701ZA CC0502TW0