Panasonic KX-FHD332 manual Thermal head

Page 77

Cleaning

Thermal head

If smudges or black/white lines appear on a copied/received document, check whether there is dust on the thermal head. Clean the thermal head to remove the dust.

1 Disconnect the power cord and the telephone line cord.

4 Open the back cover. Remove the ink film.

Telephone line cord

Power cord

2 Open the front cover by pulling up the center part.

Center part

Front cover

3 Push the back cover open button (green) on the right side of the unit.

Push the back cover open lever (green) inside of the unit.

Back cover open button (green)

Back cover

5 Clean the thermal head with a cloth moistened with isopropyl rubbing alcohol, and let it dry thoroughly.

Caution:

LTo prevent a malfunction due to static electricity, do not use a dry cloth and do not touch the thermal head directly.

Thermal head

Back cover

open lever (green)

For Fax Advantage assistance, call 1-800-435-7329.

Image 77

Contents Compact Plain Paper Fax and Copier Operating InstructionsEnergy Star For your future ReferenceTrademarks CopyrightImportant safety instructions Safety instructionsNever install telephone wiring during a Lightning storm Wet locations Never touch uninsulated telephone wires orTable of Contents Table of Contents Included accessories AccessoriesPart No. PFJA1030Z Part No. PFJXE0805Z orModel No Specifications/Usage Accessory informationLocation of controls Finding the ControlsDisplay One-touch keysRear view OverviewFront view Ink film InstallationOpen the front cover by pulling up the center part Open the back coverTurn the gear of blue core in the direction of the arrow To use A4 size paper Paper trayTo use legal size paper Attach the document tray into the slots on Document tray HandsetTo add paper Recording paperConnecting to a telephone line jack and power outlet Connections and SetupUsing surge protectors Selecting the way to use your fax machineYour situation Connections Telephone wiring image House or officeYou wish to use the fax machine and your Answering machine in the same roomHow to receive calls How to set upIf the answering machine is turned off With the fax machineCase 2 One line used for fax only Fax machine will receive it automatically How to set up How to receive callsTelephone wiring image in house or office TEL Mode Your situation Telephone wiring image in house or office ConnectionsFAX TEL Voice mail Connections and Setup Single telephone line Phone number Fax Computer machine EXT. in USE Help function Help ButtonAdjusting volume VolumeRinger volume Handset receiver volumeDate and time, your logo and fax number Setting the date and timeInitial Programming Example Bill Setting your logoTo change capital or lower-case letters To delete a characterKeys Characters To select characters using + or Display order of charactersTo select characters with the dial keypad To delete a number Setting your fax numberExample +234 Storing names and telephone numbers into one-touch dial Automatic DialingStoring names and telephone numbers into navigator directory Press Menu Example Editing a stored entryErasing a stored entry To cancel erasing, press Stop Press SETPress + or -displayed Example Until the desired entry is Stored name and number are erasedUsing the directory Using one-touch dialPress Monitor or lift the handset Press the desired station keyTo confirm caller information using Caller ID list Caller ID service from your phone companyCaller ID How Caller ID is displayedPress Caller ID Viewing and calling back using caller informationTo stop viewing To edit the telephone number for calling backErasing caller information To cancel erasing, press STOP, thenErasing all caller information Erasing specific caller informationFor navigator directory Sending Faxes To select the resolutionSending a fax manually To redial the last number Press REDIAL/PAUSETo transmit more than 10 pages at a time Press FAX/START Sending from memory Quick scan featureConvenient way to send a fax To stop transmissionDocuments you can send Document weightMinimum size Maximum size Effective scanning areaUsing stations Sending a fax using one-touch dial and navigator directoryUsing navigator directory Fax auto redialProgramming entries into the broadcast memory Broadcast transmissionPress Broadcast Program entriesPress + or -until the following is displayed Adding a new entry into the broadcast memoryStation Example Example NikkiExample BOB Erasing a stored entry in the broadcast memoryTo send the same document to more than one party only once To cancel the broadcast settingReceiving Faxes Activating TEL modeReceiving a fax manually To stop receivingFax documents Activating FAX only mode How to receive callsReceiving a fax automatically Activating the Distinctive Ring feature Using two or more phone numbers in a single telephone lineDistinctive Ring Press #, thenProgramming the ring pattern assigned for fax Ring pattern SettingsIf you use three or more phone numbers To stop copying Quick scan featureCopying Convenient way of copying Example Making 2 copies of a 4-page original document To collate multiple copiesPress + or -repeatedly until the following is displayed Programming method for basic features Features SummaryTo cancel programming ProgrammingProgramming method for advanced features Basic features Advanced features Code #44 Setting the memory reception alert Code #40 Setting the silent detectionCode #46 Setting the friendly reception Code #36 Receiving oversized documentsConnecting Tone MODE=ON ± Code #76 Setting the connecting toneCommunication Error Code 40-42, 46-72, FF Error MessagesCommunication Error Code 43 ERROR-NOT Your Unit Code 54, 59Press SET to clear the message DisplayBack cover is open. Close it Remaining film is low. Prepare a new filmRecording paper jam occurred. Clear the jammed paper Transmission error occurred. Try againWhen a function does not work, check here Frequently Asked QuestionsGeneral Fax sendingFax receiving Receiving modeCopying Using an answering machineIf a power failure occurs Remove the stoppers and tags from the new ink film ReplacementDotted area Back cover Front cover Display Jams When the recording paper has jammed in the unitRecording paper jam Remove the jammed recording paperAround the blue core When the recording paper was not fed into the unit properly Close the front cover securely Document jams sendingDo not use paper products, such as paper towels or tissues CleaningConnect the power cord and the telephone line cord Document feederThermal head Correct Reference lists and reports Printed ReportsOpenLCR service for the Caller IQ feature Caller IQ FeatureTo turn the Caller IQ feature From on to OFFUpdating the rate table downloading the rate table To turn the Caller IQ feature from OFF to onDuring download Set the Caller IQ feature to on by referring toOr sending/receiving a document Automatic downloadTechnical data about this product SpecificationsRecording paper size Paper specificationsFCC and Other Information FCC and Other InformationFCC and Other Information Panasonic Facsimile Product Limited Warranty Limited WarrantyFAX categories Parts Labor Thermal Transfer FacsimileFor product service WarrantyCustomer Services directory Customer ServicesAdvanced features Basic featuresIndex Program indexNavigator directory Ring settingOne-touch dial ReportsPFQX1701ZA CC0502TW0 Panasonic FAX Advantage Program