Receiving Faxes
FAX ONLY mode!
(all calls are received as faxes)
Activating FAX ONLY mode
1
2
Set feature #77 to “FAX ONLY” (p. 59).
If the AUTO ANSWER light is off, turn it on by pressing AUTO ANSWER .
●The display will show the number of rings before the unit answers a call in FAX ONLY mode.
Display: PICKUP & RCV FAX
ON
Display
Example:
AFTER 3 RINGS
If you wish to change the ring count setting, |
|
3 rotate JOG DIAL until the desired number | JOG DIAL |
is displayed, and press SET . | SET |
When receiving calls, the unit will |
|
● |
|
automatically answer all calls and only |
|
receive fax documents. |
|
Note:
●If the AUTO ANSWER light is already on and you wish to change the ring count, turn it off once then on
again by pressing AUTO ANSWER and follow the instructions in step 3.
●This mode should not be used with a telephone line which is used for both voice and fax calls. Fax communication will be attempted even if someone is trying to call you.
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
Line 1 – Voice calls |
Line 2 – Fax calls |
Only a fax machine is connected.
43