Panasonic WJ-MP204C manual Specifications

SPECIFICATIONS

Power Source	: 120 V AC 60 Hz
Power Consumption	: 7 W
Camera Input	: 1 V[p-p]/75 Ω	x 4
Spot Input	: 1 V[p-p]/75 Ω	x 1
VS/VD Input	: VS (1 V[p-p]/75 Ω ), or VD (4 V[p-p]/75 Ω ) x1
Camera Output	: 1 V[p-p]/75 Ω (Looped through) x4
Spot Output	: 1 V[p-p]/75 Ω x1 (Changeable Output from camera input or Spot input)
VS/VD Output	: VS/VD IN (Looped through), or internal VD (4 V[p-p]/75 Ω ) x 1
Data Communication Standard	: Based on RS-485 (4-Line/2-Line*1)
	Modular Jack x 1, or 5-pin terminal x 1*2
Alarm Input	: 4 (Alarm Output/Remote Input/Remote Output selectable)*3
Alarm Output	: 1 (O.C. [16 V, 100 mA])
Alarm Recover Input	: 1 (No Voltage Contact)
Alarm Reset Output	: 1 (0/5 V ↔ O.C. [16 V, 100 mA])*4
Spot Switching Input	: 1 (No Voltage Contact)
Spot Switching Output	: 1 (O.C. [16 V, 100 mA])
Unit address	: 1 - 8 (Set with UNIT switch) 9-99 (Set in Setup menu)
Operating for System	: Selection Camera
	Alarm (Data/Display/Reset/Suspend)
	Setup
	Camera, Lens, Housing, PAN/TILT, External device control
Ambient Operating Temperature	: –10°C - +50°C (14°F - 122°F )
Ambient Operating Humidity	: Less than 90 %
Dimensions	: 210 (W) x 44 (H) x 350 (D) mm
	[8-9/16”(W) x1-3/4”(H) x13 3/4”(D)]
Weight	: 2.6 kg (5.72 lbs.)

*1 Selectable using the mode switch

*2 Valid in communication mode

*3 Selectable using the setup menu and internal connector

*4 Selectable using an internal switch

Dimensions and weight are approximate.

Specifications are subject to change without notice.

30