Panasonic WJ-MP204C Setup Menus for PS Data, Communication setup PS Data, System setup PS Data

■Setup Menus for PS • Data

●Communication setup (PS • Data)

Communication parameters for a PS • Data protocol system are set in this menu.

1.Hold down the SETUP button for 2 seconds to open the setup menu.

WJ-MP204C SETUP MENUX.XX

COMMUNICATION

SYSTEM

2.Move the cursor to COMMUNICATION , then press SET. The communication setup appears.

COMMUNICATION

UNIT ADDRESS		1
BAUD RATE
		9600
DATA	BIT	8
PARITY CHECK
		NONE
STOP	BIT
		1
WAIT	TIME
		OFF

DATA BIT

1.Move the cursor to DATA BIT, then specify a bit length with the [–] or [+] button. The default setting is 8.

Available bit length: 7, 8

PARITY

1.Move the cursor to PARITY CHECK, then specify a check mode with the [–] or [+] button. The default set- ting is NONE.

Available check modes: NONE, EVEN, ODD

STOP BIT

1.Move the cursor to STOP BIT, then specify a bit length with the [–] or [+] button. The default setting is 1.

Available bit length: 1, 2

WAIT TIME

The unit will retransmit data when there is no response dur- ing the specified wait time.

1.Move the cursor to WAIT TIME, then specify a time with the [–] or [+] button. The default setting is OFF for not resending.

Available wait times (ms): OFF, 100, 200, 400,

1000

2.Press ESC to return to the WJ-MP204C SETUP MENU.

8UNIT ADDRESS

1.Move the cursor to UNIT ADDRESS, then specify a number with the [–] or [+] button. The default setting is 1.

Available numbers: 1-99

Note: This setting takes effect only when the UNIT switch is set to 0 on the front panel.

BAUD RATE

1.Move the cursor to BAUD RATE, then specify a rate with the [–] or [+] button. The default setting is 9 600.

Available rates (bit per second): 19 200, 9 600,

4 800, 2 400

● System setup (PS • Data)

Parameters related to alarm, sync, and remote functions are set in this menu for a PS • Data protocol system.

The SYSTEM menu is displayed when you select it in the WJ-MP204C SETUP MENU.

SYSTEM
ALARM MODE
	ON
COMP/VD2/DATA
VS/VD INPUT
	VD
CAMERA CONFIG
DAISY MODE
	ON
TERMINAL
	ALARM

21