Panasonic PT-D5700E, PT-DW5100EL manual Powering off the projector, Direct power off function

Page 23

Powering off the projector

Press the POWER STANDBY “ ” button.

Select “OK” with or button and press the ENTER button.

(Or press the POWER STANDBY “ ” button again.)

The projection of the image stops, and the power indicator of the main unit lights up orange. (The cooling fan keeps running.)

Wait until the power indicator of the main unit turns to red (i.e., until the cooling fan stops).

Press the “ ” marked side of the MAIN POWER switch to remove all power from the projector.

Attention • Do not turn the power supply off and then immediately back on again.

Turning on the power supply may not light up the light source lamp if the lamp is in the process of cooling down after turning off the power supply. To light up the lamp, turn on the power supply again when the lamp has been cooled sufficiently. Turning on the power supply with the lamp in the hot condition may shorten the lamp life.

Note • The projector consumes approximately 15 watts of power even in standby mode after the cooling fan stops. (Power indicator lit in red.)

•If you re-power the projector after shutting off the main power inadvertently, the projection lamp may remain unlit. Please turn the main power on again after a while.

Direct power off function

The power supplied internally causes the cooling fan to continue operating and cool off in the event that the power has failed or even after the power cord is accidentally disconnected immediately after the power has been turned off.

Note • When the lamp has been cooled by the direct power off function, it sometimes

takes longer than usual for the lamp to light up again.

•While the cooling fan is operating, do not place the projector inside a box or bag.

ENGLISH

23

Image 23

Contents Operating Instructions Model number PT-D5700E/PT-D5700EL/PT-DW5100E/PT-DW5100EL Dear Panasonic CustomerImportant the Moulded Plug U.K. only For Your SAFETY, Please Read the Following Text CarefullyContents Precautions with regard to safety Always disconnect all cables before moving the projector Remove empty batteries from the remote control at onceDo not use or handle the batteries improperly Do not disassemble the lamp unitDo not place the projector in extremely hot locations AccessoriesDo not use the old lamp unit Precautions on handling Name and function of parts Remote controlBottom Status LED lights Front and side of the projectorRear view of the main unit Controls on rear panel Side-mounted connection terminals Loading dry cells Using the remote control unitEffective range of remote control operation Connect to the projector to use with a cable Setting projector ID number to remote controlUnit mm InstallationInstallation geometry Projection schemesScreen aspect ratio Projection distance by projection lensPT-D5700E, PT-D5700EL PT-DW5100E, PT-DW5100EL InstallationCalculation formulas for projection distance by lens types Connection Setup precautionsExample of connecting with PCs Example of connecting with AV productsProjection Powering up the projectorMaking adjustment and selection Press the I button. on the main unit or the remote controlDirect power off function Powering off the projectorHow to remove the projection lens How to adjust the lensHow to adjust the FOCUS, Zoom and Shift Press the Shutter button again Automatic adjustmentPress the Status button on the remote control Status functionStructure of menu screens On-screen menusReturning to the previous Menu items settingResetting to the factory default Basic menu operationsAdjusting the picture Adjusting the position Digital Cinema Reality Clock PhaseZoom KeystoneEdge Blending Input ResolutionClamp Position Raster Position XGA ModeSxga Mode Press to select an item, and press to adjust the settingPress to select R, G, B and Wh OPTION1 settingsPress the Enter button Press to adjust the values Color MatchingBack Color Contrast ModeAuto Signal Color CorrectionOSD Position DVI Signal LevelDVI Edid FUNC1Altitude OPTION2 settingsInstallation Projector IDRS-232C Lamp PowerLamp Select Lamp RelayCycle of displayed internal test patterns Auto Power OFFPassword System InformationConnection example Setting the networkConnecting the PC System requirementsClick OK Using Web Browser ControlAccessing from the Web browser Password changeBasic control Monitor information Detail controlOptics Module Error informationMail set up Authentication server set up Ping test DNS server set upAdjust clock Contents of mail sentNetwork status Network configCommand Control Description Remarks Using the PJLink protocolSupported commands PJLink security authenticationControl Device Setup Setting the securityPassword Change Display SettingExamples of connection Using the serial terminalsPin assignments and signal names Communication conditions Factory settingPin assignments and control Control commandsCable specifications Connecting to a PC Computer Projector DTE specificationsIndication of lamp monitor Dismantle the air filter Cleaning and replacement of air filterProcedure of cleaning Clean the air filterAfter When to replace the Lamp unitReplacing the lamp unit LampHave a Phillips screwdriver ready ahead of time Lamp unit replacement stepsRemove the two screws securing the fan unit Lamp unit will be hot after it has been usedInstallation procedure Ceiling Mount Bracket SafeguardsImage is blurred Power doesNot turn on No imagePT-D5700E PT-D5700EL PT-DW5100E SpecificationsReplacement lamp unit Length of power cord CabinetOutside dimensions Remote control Power sourcePAL-M/PAL60 PAL/PAL-N/SECAM Compatible Signal ListInstallation dimensions diagram DimensionsFor business users in the European Union Trademark Acknowledgement