How to install and remove the projection lens
How to install the projection lens
Align the guide of the projection lens with the guide groove in the main unit. 
Turn the lens clockwise until it clicks into place.
Guide groove Guide
Guide groove |
|
|
| Guide |
|
|
| ||
| ||||
|
|
|
How to adjust the lens
How to adjust the FOCUS, ZOOM and SHIFT
The focus, zoom and up/down position of the images projected on the screen can be adjusted while the projector is positioned appropriately in relation to the screen.
At the projector
Press LENS on the control panel on the main unit.
Pressing the button changes the setup screen in the order of “FOCUS”, “ZOOM” and “SHIFT”.
Press 
to select an item and adjust it.
Using the remote control
Press LENS (FOCUS/ZOOM/SHIFT) on the remote control.
Lens signal contact
Projection lens
When the FOCUS button is pressed :
The focus is adjusted.
Attention • Turn the lens counterclockwise and confirm that the lens does not come
off.
How to remove the projection lens
Turn the lens counterclockwise as far as it will go.
While holding down the lens release button, turn the lens further counterclockwise.
Remove the lens.
Lens release button
Note • Before replacing the lens, turn off the projector’s power.
•Do not touch the lens signal contact. Dust or dirt may cause defective contact.
•Do not touch the surface of the projection lens with your bare hands.
•Store the replaced lens where it will be free from vibration and impact.
When the ZOOM button is pressed :
The zoom is adjusted.
When the SHIFT button is pressed :
The shift is adjusted.
Press 
to select an item and adjust it.
Caution
Be careful not to catch your fingers between the lens and shroud when shifting the lens.
Note | • When a lens without zoom functions |
| is used, the lens zoom adjustment |
| menu will still displayed, but no |
| operations can be performed using |
| the items on this menu. |
| • By shifting the lens up/down position, |
| it is possible to make adjustments |
| upward or downward from the |
| standard position in the direction of |
| the upper 50 % of the projected |
| screen height. However, when using |
| |
| is not possible. |
| • Operations can be performed faster |
| by holding down the |
| buttons for about 3 or more seconds. |
| • Do not adjust the lens focus in the |
| initial period (within 30 minutes) after |
| switching on. |
| • A |
| is recommended before using the |
| projector. |
24