Panasonic PT-DW5100EL Example of connecting with AV products, Example of connecting with PCs

Example of connecting with AV products

DVD player	Video deck	DVD player
		Digital Hi-vision video deck
		with DVI/HDMI terminal

									DVI-D Cable or HDMI-DVI
									conversion cable
		R/PR	G/Y	B/PB	SYNC/HD	VD			(available in the market)
VIDEO IN	S-VIDEO IN			RGB 1 IN			RGB 2 IN	DVI-D IN	LAN
	REMOTE 1		REMOTE 2 IN		IN	SERIAL	OUT
	IN	OUT							Control PC

Red (Connect PR)	D-Sub 9-pin straight cable
Blue (Connect PB)

Green(Connect Y)

Digital Hi-vision video deck

Attention • When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between the projector and the video deck.

•If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the projector and the video deck.

•The EDID settings may be needed depending on the equipment connected when DVI-D signals are input. (Refer to page 35.)

ENGLISH

Example of connecting with PCs

PC	PC with
	DVI-D terminal

PC

Control PC

DVI-D Cable (available in the market)

		R/PR	G/Y	B/PB		SYNC/HD	VD
VIDEO IN	S-VIDEO IN			RGB	1 IN			RGB 2 IN	DVI-D IN	LAN
	REMOTE 1		REMOTE 2 IN			IN	SERIAL	OUT
	IN	OUT

		R/PR	G/Y	B/PB	SYNC/HD	VD
VIDEO IN	S-VIDEO IN			RGB 1 IN			RGB 2 IN	DVI-D IN	LAN
	REMOTE 1		REMOTE 2 IN		IN	SERIAL	OUT
	IN	OUT

Note • For the specifications of the RGB signals that can be applied from the PC, see the data sheet on page 61.

•If your PC has the resume feature (last memory), the computer may not function properly until the resume capability is disabled.

•When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD terminals.

•The EDID settings may be needed depending on the equipment connected when DVI-D signals are input. (Refer to page 35.)

21