Registering in sub memory
Select the sub memory number to be registered
using the 
buttons. 
Press the ENTER button.
Note • Sub memories range from 1 to 8.
How to select sub memory
Select sub memory number (1 to 8) using the 
buttons. Select
use the sub memory.
Press the ENTER button.
Note • You cannot select sub memory of a different signal system.
How to erase sub memory
Select sub memory number (1 to 8) corresponding
to sub memory to be erased using 
buttons. 
Press the DEFAULT button.
Read the confirmation message and select.
DVI EDID
When the projector and external equipment are connected by DVI connection but a proper image cannot be obtained, switch this setting.
EDID1
Select this mainly when external equipment (DVD player, etc.) that outputs movie video signals is connected to the DVI terminal.
EDID2:PC
Select this mainly when external equipment (personal computer, etc.) that outputs still image video signals is connected to the DVI terminal.
Mode | EDID data |
DVI SIGNAL LEVEL
When the projector and external equipment are connected by DVI connection but a proper image cannot be obtained, switch this setting.
Select this mainly when connecting external equipment (personal computer, etc.) using the DVI terminal output.
Select this mainly when connecting external equipment (DVD player, etc.) using the HDMI terminal output with a conversion cable, etc.
Note • The optimum setting differs according to the connected external equipment. Be sure to check the operating instructions for the external equipment, etc.
•Depending on the setting, some equipment may not provide images or otherwise operate properly.
FUNC1
The user can set the function for the remote control’s FUNC1 button.
SYSTEM SELECTOR:
The button functions in the same way as “SYSTEM SELECTOR” of “PICTURE”.
SYSTEM DAYLIGHT VIEW:
This button has the same functions as
“SYSTEM DAYLIGHT VIEW” of “PICTURE”.
SUB MEMORY LIST:
This button has the same functions as “SUB MEMORY LIST” of “OPTION1”.
OSD POSITION
The user can specify the position of the
ENGLISH
EDID1
480p, 576p, 1080/60i, 1080/50i, 720/60p, 720/50p, 1080/60p, 1080/50p
1 (Top left of the screen)
2 (Left centre of the screen)
VGA60, SVGA60, XGA50, XGA60, EDID2:PC XGA70, XGA75, XGA85, WXGA768/50*,
WXGA768/60*, SXGA60
* PT-DW5100E, PT-DW5100EL only
9 (Bottom right of the screen)
8 (Right centre of the screen)
3 (Bottom left of the screen)
4 (Top centre of the screen)
5 (Centre of the screen)
Note • The optimum setting differs according to the connected external equipment. Be sure to check the operating instructions for the external equipment, etc.
•Depending on the setting, some equipment may not provide images or otherwise operate properly.
7 (Top right of the screen) |
| 6 (Bottom centre of the screen) | ||
|
|
|
|
|
|
|
|
|
|
OSD MEMORY
This lets you save the cursor position in
ON : The cursor position is saved.
OFF : The cursor position is not saved.
Note • Even when this is set to “ON”, the cursor position is not saved if the main power of the projector is turned off.
35