Name and function of parts
Rear view of the main unit |
| Controls on rear panel |
Controls on rear panel
Air exhaust vents
Do not place your hands or other objects close to the air outlet port.
•Heated air comes out of the air outlet port. Do not place your hands or face, or objects which cannot withstand heat close to this port [allow at least 50 cm of space], otherwise burns or damage could result.
AUTO SETUP button (page 25)
Pressing this button while projecting an image automatically corrects the picture positioning on the screen.
DVI button (page 22)
Switches to
SHUTTER button (page 25)
Press this button to black out the image temporarily.
Lamp unit cover
The lamp unit is housed.
MAIN POWER switch (page 22)
Use this switch to turn on “I” and off “O” the main power applied to the projector.
Remote control receiver window (rear) (page 14)
This also receives the signal beam coming from the remote control.
POWER ON ( I ) button (page 22)
Turns on the power.
POWER STANDBY ( 
) button (page 23)
Switches the power to the “standby” mode.
RGB1 button (page 22)
Switches to RGB1 input.
RGB2 button (page 22)
Switches to RGB2 input.
VIDEO button (page 22)
Switches to video input.
Switches to
MENU button (page 27)
Displays and clears the MAIN MENU. It can also return to the previous screen when the menu is displayed.
The
ENTER button (page 27)
Press this button to enter your menu selection or to run function.
LENS button (page 24)
Switches to the adjustment mode for lens focus, zoom and shift (position).
Arrow ( | ) buttons (page 27) |
Use to select an item on the menu screen, change setting and adjust the level.
Also use them to enter the “SECURITY” password.
12