Using Web Browser Control
This projector has networking functions which allow it to be controlled through a Web browser on a PC. The controlled items are:
•Projector’s settings and adjustment
•Projector’s status display
•Transmission of a
Accessing from the Web browser
Start the Web browser on your PC, then enter the IP address which was set in the projector.
Enter “user1” in the user name field, then enter the password in the password field.
The default setting is “panasonic” (all lower case). If you have changed the password, enter the new password here.
The host name set in the projector is displayed in the “Realm” field.
Click [OK].
The Basic Control page is displayed.
Note • Avoid activating two or more Web browser simultaneously to work out setting or control actions.
• Change the password first of all.
Password change page
Click [Change password].
Old password input field
New password input field
New password input field
Button for erasing all entered characters
Button for executing password change
40