Nortel Networks manual SRG50 creation, BCM50 default IP addresses, Port IP address Subnet mask

Page 16

16Chapter 2 SRG50 overview

Table 2 Summary of supported features on the different SRG versions (Sheet 2 of 2)

Features

SRG 1.5 on BCM 200/

SRG50 1.0

SRG50 2.0

SRG50 3.0

 

400

 

 

 

 

 

 

 

 

ESA

Supported

Supported

Supported

Supported.

 

 

 

 

On Site Notification

 

 

 

 

(OSN) of E911 alarms

 

 

 

 

supported for local

 

 

 

 

users through a third

 

 

 

 

party tool.

 

 

 

 

 

Vo911

Supported

Supported

Supported

Supported.

 

 

 

 

 

Enhanced

Supported

Supported

Supported

Supported

firmware

 

 

 

 

download

 

 

 

 

 

 

 

 

 

Analog station

The number supported

Two analog station

Two analog station

Two analog station

support

depends on the

modules are

modules are

modules are

 

hardware.

supported.

supported.

supported.

 

For BCM200: two

number of analog

number of analog

number of analog

 

analog station modules

nodes= 2*8 =16)

nodes= 2*8 =16)

nodes= 2*8 =16)

 

are supported.

 

 

 

 

number of analog

 

 

 

 

nodes= 2*8 =16.

 

 

 

 

For BCM400: Four

 

 

 

 

analog station modules

 

 

 

 

are supported.

 

 

 

 

number of analog

 

 

 

 

nodes= 4*8 =32)

 

 

 

 

 

 

 

 

SRG50 creation

An SRG50 is created by applying the appropriate SRG keycode to a functional BCM50 system. SRG50 is only supported on the BCM50 and BCM50b main units. Integrated router versions of the BCM50 (BCM50a, BCM50e, BCM50ba, and BCM50be) do not support the SRG50 application.

The Installation Checklist and Quick Start Guide is provided on the SRG50 Documentation CD that is shipped with your SRG50 system. Instructions in that guide are referenced in the following procedures. Also, the relevant BCM50 default IP addresses, user names, and passwords are excerpted from that guide and provided for your reference in the table BCM50 default IP addresses on page 16 and the table BCM50 default user names and passwords on page 17.

Table 3 BCM50 default IP addresses

Port

IP address

Subnet mask

 

 

 

OAM port (see Note)

10.10.11.1

255.255.255.252

 

 

 

BCM50 LAN (no router)

192.168.1.2

255.255.255.0

 

 

 

Note: DHCP is enabled on the OAM port and assigns the following IP address: 10.10.11.2

NN40140-500

Page 15 Page 17
Image 16
Page 15 Page 17
Contents SRG50 Configuration Guide Copyright 2006-2008 Nortel Networks, All Rights Reserved SRG50 Configuration Guide Task ListNN40140-500 Contents Fallback configuration Gatekeeper routing Glossary NN40140-500 Getting started About this guideAudience AcronymsGetting started Acronyms used in this guide Sheet 2 Symbols and conventions used in this guide Command line prompts on display telephonesGetting started Convention Example Used for Word in a special font shownRelated publications Convention Example Used forHow to get help Getting Help from the Nortel Web siteGetting started NN40140-500 Features SRG 1.5 on BCM SRG50 400 SRG50 overviewSRG50 creation BCM50 default IP addressesPort IP address Subnet mask BCM50 default user names and passwords SRG50 keycode activationTo activate the SRG keycode Click Load FileSRG50 and BCM50 features comparison To reboot the systemClick Reboot BCM50 System To verify that the SRG has been successfully createdSupported devices SRG50 overview Comparison of BCM50 and SRG50 Sheet 2SRG50 terminology Sheet 1 SRG50 terminologyTerm Description Normal mode Coordination with the main office call serverSRG operating modes SRG50 overview SRG50 terminology Sheet 2Normal mode Local mode Local modeSRG installation and configuration summary Automatic registration with the main officeSRG50 overview Process map for installing and configuring an SRG Foundation configuration Configuration System IP SubsystemConfiguration Resources Application Resources Configuration Telephony Global SettingsIP telephone configuration Task summaryDialing plan configuration VoIP trunk configurationConfiguration Telephony Sets All DNs Configuration Telephony Lines Target LinesConfiguration Telephony Lines Active VoIP Lines Configuration Telephony Lines Active Physical LinesRedirection and call forward configuration Call routing configurationConfiguration Telephony Dialing Plan Routing Task summary NN40140-500 CS 1000 considerations CS 1000 and SRG terminology comparisonCS 1000 considerations Comparison of CS 1000 and SRG terms and contexts Sheet 1AC1 Normal and local mode overview Survivability Recovery to normal mode Testing the telephone in local modeVacant Number Routing VNR Virtual trunk capacityBandwidth management Adaptive Network Bandwidth Management Adbwm Network Bandwidth Management NbwmAlternative Call Routing ACR Bandwidth management configuration NBWM, ADBWM, To configure SRG for Nbwm and AdbwmTo configure Alternative Call Routing with did trunks Ensure that the DN Type is Public UnknownEmergency Services Access ESA configuration To configure Emergency Services Access To configure on-site notificationS1000 Main Office Settings Sheet 1 S1000 Main Office Settings panelCS 1000 information for the SRG S1000 Main Office Settings Sheet 2 To datafill the S1000 Main Office Settings panel CS 1000 considerations S1000 Main Office Settings Sheet 3MO Access Code Length Field Values Description Node IDIP telephones numbers and models IP telephones redirectionIP telephone numbers and models Sheet 1 S1000 IP Terminal Details panel SRG S1000 IP Terminal Details fields Sheet 1Field Values Description HardwareTo enter the Motn and Buid To redirect the telephone to the main office call serverField Values Description Firmware VersionConfiguration settings for redirected IP Phones IP telephone settingsParameter Setting Firmware upgrade Firmware upgrade procedureSupported firmware Supported IP clients and firmware versionsCS 1000 considerations NN40140-500 Registration password IP telephones setup and configurationTo set the IP telephone registration password IP telephones setup and configuration Password registration parametersIP telephone codec and jitter settings Local mode indicationTo change local mode indication Telephone DN records configuration To configure DN records for redirected IP telephonesIP telephones setup and configuration Select the Capabilities and Preferences tab Model ButtonReceived numbers configuration To map received numbers to the DNTo configure Dhcp settings for SRG operation Dhcp settings configurationCall forwarding options Configuration settings for redirected phones Test Local ModeTo activate Test Local Mode Configuration settings for redirected IP telephonesFeatures in local mode To exit Test Local Mode and return to Normal ModeReceiver volume Delayed ring transferEmergency Services Support Alarm setHeld line reminder Language and ContrastIP telephones setup and configuration NN40140-500 Setting up the private VoIP network IP networking, SRG to WAN, main office to WANSetting up the private VoIP network VoIP trunksBasic parameters Sheet 1 Basic parametersParameter Value Context Setting up the private VoIP network Basic parameters Sheet 2 Private dialing planTo enable Mcdn TAT Meridian Customer Defined Network McdnMain office QoS settings Sheet 1 QoS settings codec, jitter buffer, and related itemsMedia parameter Settings SIP settings To enter the QoS settings for VoIP trunks Modules panel, IP Trunks SRG50 Configuration GuideVoIP trunking configuration Fallback configurationTo enable fallback Network securityTo configure gatekeeper settings for H323 trunks Gatekeeper routingOutgoing calls configuration To configure routing for outgoing callsLine pools Call routingSelect the Destination Codes tab Remote Access Package for VoIP trunks SRG Pstn accessTo configure remote access packages Pstn destination codes configuration To configure destination codes for the PstnMain office information External attendant supportPstn access considerations Pstn access and analog devicesAnalog devices considerations Access to system features To configure the DNs for analog devicesPstn access and analog devices Select the Capabilities and Preferences tab Pstn access and analog devices NN40140-500 Troubleshooting IP telephone troubleshootingIP telephone troubleshooting Sheet 1 Issue / Problem Probable Cause / SolutionTroubleshooting IP telephone troubleshooting Sheet 2 IP terminal detailsIP Terminal Details Sheet 1 Call Server Details Event Id Severity Type CommentsProbable causes for redirection failure TroubleshootingIP Terminal Details Sheet 2 Troubleshooting fallback to local mode IP telephones manual redirectionTo manually redirect an IP telephone to the main office IP telephone firmware discrepanciesCannot clear alarms using an alarm set Troubleshooting NN40140-500 Normal mode Telephone features in normal and local modeLocal mode IP Phone 1110 in Local mode Telephone features in normal and local modeIP Phone 1140E in Local mode IP Phone 1120E in Local modeIntercom/Line IP Phone 2001 in Local mode IP Phone 2002 in Local modeIP Phone 2004 in Local mode IP Phone 2007 in Local modeIP Phone 2033 in Local mode ATA extension features IP 2050 Softphone in Local ModeFeature Activate Cancel Link key sequences Sheet 1Link *3 Gatekeeper Gateway H.323 IP telephones Local mode GlossaryBranch office Call routing Dialing planNormal mode QoS GlossaryMain office, main office call server Steering codesIndex 100 101 102
Top Page Image Contents