Nortel Networks SRG50 S1000 IP Terminal Details panel, Field Values Description, Hardware, Status

Page 48

48Chapter 4 CS 1000 considerations

Table 9 IP telephone numbers and models (Sheet 2 of 2)

TN (CS 1000) MOTN (SRG) (same number)

BUID (same

number at CS 1000 SRG DN and SRG)

IP telephone model

S1000 IP Terminal Details panel

Element Manager provides SRG-specific panels for recording the CS 1000 TN and BUID that are associated with a particular SRG DN. The table SRG S1000 IP Terminal Details fields on page 48 lists and describes the fields on the S1000 IP Terminal Details panel.

Table 10 SRG S1000 IP Terminal Details fields (Sheet 1 of 2)

Field	Values	Description

DN	Read-only	The SRG DN assigned to the telephone.
		The SRG DN must be configured before proceeding with the
		procedures that follow in this section. See Telephone (DN) records
		configuration on page 56.

Hardware	Read-only	Hardware ID.
ID		Unique for each IP telephone.

Status	Read-only	Current status of the telephone.
		See IP terminal details on page 84 (expand the field to read the entire
		status message).

NN40140-500

Image 48

Contents SRG50 Configuration Guide Copyright 2006-2008 Nortel Networks, All Rights Reserved SRG50 Configuration Guide Task ListNN40140-500 Contents Fallback configuration Gatekeeper routing Glossary NN40140-500 Getting started About this guideAudience AcronymsGetting started Acronyms used in this guide Sheet 2 Symbols and conventions used in this guide Command line prompts on display telephonesGetting started Convention Example Used for Word in a special font shownRelated publications Convention Example Used forHow to get help Getting Help from the Nortel Web siteGetting started NN40140-500 Features SRG 1.5 on BCM SRG50 400 SRG50 overviewBCM50 default IP addresses SRG50 creationPort IP address Subnet mask BCM50 default user names and passwords SRG50 keycode activationTo activate the SRG keycode Click Load FileSRG50 and BCM50 features comparison To reboot the systemClick Reboot BCM50 System To verify that the SRG has been successfully createdSupported devices SRG50 overview Comparison of BCM50 and SRG50 Sheet 2SRG50 terminology SRG50 terminology Sheet 1Term Description Normal mode Coordination with the main office call serverSRG operating modes SRG50 overview SRG50 terminology Sheet 2Normal mode Local mode Local modeSRG installation and configuration summary Automatic registration with the main officeSRG50 overview Process map for installing and configuring an SRG Foundation configuration Configuration System IP SubsystemConfiguration Resources Application Resources Configuration Telephony Global SettingsIP telephone configuration Task summaryDialing plan configuration VoIP trunk configurationConfiguration Telephony Sets All DNs Configuration Telephony Lines Target LinesConfiguration Telephony Lines Active VoIP Lines Configuration Telephony Lines Active Physical LinesCall routing configuration Redirection and call forward configurationConfiguration Telephony Dialing Plan Routing Task summary NN40140-500 CS 1000 considerations CS 1000 and SRG terminology comparisonCS 1000 considerations Comparison of CS 1000 and SRG terms and contexts Sheet 1AC1 Normal and local mode overview Survivability Recovery to normal mode Testing the telephone in local modeVirtual trunk capacity Vacant Number Routing VNRBandwidth management Network Bandwidth Management Nbwm Adaptive Network Bandwidth Management AdbwmAlternative Call Routing ACR Bandwidth management configuration NBWM, ADBWM, To configure SRG for Nbwm and AdbwmTo configure Alternative Call Routing with did trunks Ensure that the DN Type is Public UnknownEmergency Services Access ESA configuration To configure Emergency Services Access To configure on-site notificationS1000 Main Office Settings panel S1000 Main Office Settings Sheet 1CS 1000 information for the SRG S1000 Main Office Settings Sheet 2 To datafill the S1000 Main Office Settings panel CS 1000 considerations S1000 Main Office Settings Sheet 3MO Access Code Length Field Values Description Node IDIP telephones redirection IP telephones numbers and modelsIP telephone numbers and models Sheet 1 S1000 IP Terminal Details panel SRG S1000 IP Terminal Details fields Sheet 1Field Values Description HardwareTo enter the Motn and Buid To redirect the telephone to the main office call serverField Values Description Firmware VersionIP telephone settings Configuration settings for redirected IP PhonesParameter Setting Firmware upgrade Firmware upgrade procedureSupported firmware Supported IP clients and firmware versionsCS 1000 considerations NN40140-500 IP telephones setup and configuration Registration passwordTo set the IP telephone registration password IP telephones setup and configuration Password registration parametersLocal mode indication IP telephone codec and jitter settingsTo change local mode indication Telephone DN records configuration To configure DN records for redirected IP telephonesIP telephones setup and configuration Select the Capabilities and Preferences tab Model ButtonReceived numbers configuration To map received numbers to the DNDhcp settings configuration To configure Dhcp settings for SRG operationCall forwarding options Configuration settings for redirected phones Test Local ModeTo activate Test Local Mode Configuration settings for redirected IP telephonesFeatures in local mode To exit Test Local Mode and return to Normal ModeReceiver volume Delayed ring transferEmergency Services Support Alarm setHeld line reminder Language and ContrastIP telephones setup and configuration NN40140-500 Setting up the private VoIP network IP networking, SRG to WAN, main office to WANSetting up the private VoIP network VoIP trunksBasic parameters Basic parameters Sheet 1Parameter Value Context Setting up the private VoIP network Basic parameters Sheet 2 Private dialing planTo enable Mcdn TAT Meridian Customer Defined Network McdnQoS settings codec, jitter buffer, and related items Main office QoS settings Sheet 1Media parameter Settings SIP settings To enter the QoS settings for VoIP trunks Modules panel, IP Trunks SRG50 Configuration GuideVoIP trunking configuration Fallback configurationTo enable fallback Network securityTo configure gatekeeper settings for H323 trunks Gatekeeper routingOutgoing calls configuration To configure routing for outgoing callsLine pools Call routingSelect the Destination Codes tab SRG Pstn access Remote Access Package for VoIP trunksTo configure remote access packages Pstn destination codes configuration To configure destination codes for the PstnMain office information External attendant supportPstn access and analog devices Pstn access considerationsAnalog devices considerations To configure the DNs for analog devices Access to system featuresPstn access and analog devices Select the Capabilities and Preferences tab Pstn access and analog devices NN40140-500 Troubleshooting IP telephone troubleshootingIP telephone troubleshooting Sheet 1 Issue / Problem Probable Cause / SolutionTroubleshooting IP telephone troubleshooting Sheet 2 IP terminal detailsIP Terminal Details Sheet 1 Call Server Details Event Id Severity Type CommentsTroubleshooting Probable causes for redirection failureIP Terminal Details Sheet 2 Troubleshooting fallback to local mode IP telephones manual redirectionTo manually redirect an IP telephone to the main office IP telephone firmware discrepanciesCannot clear alarms using an alarm set Troubleshooting NN40140-500 Telephone features in normal and local mode Normal modeLocal mode IP Phone 1110 in Local mode Telephone features in normal and local modeIP Phone 1120E in Local mode IP Phone 1140E in Local modeIntercom/Line IP Phone 2001 in Local mode IP Phone 2002 in Local modeIP Phone 2004 in Local mode IP Phone 2007 in Local modeIP Phone 2033 in Local mode ATA extension features IP 2050 Softphone in Local ModeFeature Activate Cancel Link key sequences Sheet 1Link *3 Gatekeeper Gateway H.323 IP telephones Local mode GlossaryBranch office Call routing Dialing planNormal mode QoS GlossaryMain office, main office call server Steering codesIndex 100 101 102