18Chapter 2 SRG50 overview
To reboot the system
1In Element Manager, navigate to the Reset panel (Administration > Utilities > Reset).
2Click Reboot BCM50 System.
To verify that the SRG has been successfully created
1In Element Manager, navigate to the Keycodes panel (Configuration > System > Keycodes). In the Feature licenses table, verify that the status of the SRG keycode is ACTIVE.
2Open the Resources folder (Configuration > Resources). Verify that there is a Survivable Remote Gateway panel.
SRG50 and BCM50 features comparison
The table Comparison of BCM50 and SRG50 on page 18 compares SRG50 and BCM50 features.
Table 5 Comparison of BCM50 and SRG50 (Sheet 1 of 2)
Item | BCM50 | SRG50 |
|
|
|
MBMs | See the | Recommended: |
| Installation and | ASM8+ (8 port Analog Station Module); DTM |
| Maintenance | (Digital Trunk Module - 24 lines on either T1 |
| Guide | |
| or E1 or PRI); BRI (4 line BRI S/T Module); | |
| ||
| GATM4 (Global Analog Trunk MBM - 4 port); | |
|
| GATM8 (Global Analog Trunk MBM - 8 port) |
|
| ADID4 (4 analog lines) |
|
| ADID8 (8 analog lines) |
|
| G4x16 (16 digital ports and 4 analog trunks); |
|
| G8x16 (16 digital ports and 8 analog trunks) |
|
| Supported for ATA connections: |
|
| DSM16 (Digital Station Module - 16 ports); |
|
| DSM32 (Digital Station Module - 32 ports); |
|
| 4x16 Combo (16 digital ports, 4 analog |
|
| trunks and 1 analog station); |
|
| Does not support: |
|
| DDIM (Digital Drop and Insert Mux) |
|
| FEM (Fiber Expansion Module) |
|
| DECT (Digital Enhanced Cordless |
|
| Telecommunications) |
|
|
|
Digital telephone sets | Yes | No |
|
|
|
FCAPS | Yes | Yes, extended to include |
|
| alarms and keycodes |
|
|
|
Network Configuration Manager | Yes | Yes |
|
|
|
Telset Administration | Yes | No |
|
|
|
CS 1000 Geographic Redundancy | N/A | Yes |
|
|
|
CS 1000 Network Bandwidth Management | N/A | Yes |
|
|
|