Nortel Networks SRG50 manual Cannot clear alarms using an alarm set

Page 87

Chapter 8 Troubleshooting 87

3Click the Status tab to view the Status field. If Status displays Up, the conversion was successful.

a If the IP terminal does not register correctly with the main office, refer back to the IP Terminal Status tab, Status field and review the message to determine where the problem occurred. See IP terminal details on page 84.

b If the conversion occurred correctly, perform basic telephony tests to ensure that the telephones are working as expected:

—Make and receive calls.

—Check feature access.

—Check voice mail access

For specific information about making calls and using features, see the feature guides for the main office application.

Cannot clear alarms using an alarm set

If you specify an alarm set (telephone) on the SRG through Element Manager, you cannot clear alarms using the alarm set. When the alarm set is in local mode, the soft keys are disabled and therefore alarms cannot be cleared.

The Alarm Set feature is not supported on SRG.

SRG50 Configuration Guide

Image 87

Contents SRG50 Configuration Guide Copyright 2006-2008 Nortel Networks, All Rights Reserved Task List SRG50 Configuration GuideNN40140-500 Contents Fallback configuration Gatekeeper routing Glossary NN40140-500 Acronyms Getting startedAbout this guide AudienceGetting started Acronyms used in this guide Sheet 2 Convention Example Used for Word in a special font shown Symbols and conventions used in this guideCommand line prompts on display telephones Getting startedConvention Example Used for Related publicationsGetting Help from the Nortel Web site How to get helpGetting started NN40140-500 SRG50 overview Features SRG 1.5 on BCM SRG50 400BCM50 default IP addresses SRG50 creationPort IP address Subnet mask Click Load File BCM50 default user names and passwordsSRG50 keycode activation To activate the SRG keycodeTo verify that the SRG has been successfully created SRG50 and BCM50 features comparisonTo reboot the system Click Reboot BCM50 SystemSRG50 overview Comparison of BCM50 and SRG50 Sheet 2 Supported devicesSRG50 terminology SRG50 terminology Sheet 1Term Description SRG50 overview SRG50 terminology Sheet 2 Normal modeCoordination with the main office call server SRG operating modesNormal mode Local mode Local modeAutomatic registration with the main office SRG installation and configuration summarySRG50 overview Process map for installing and configuring an SRG Configuration Telephony Global Settings Foundation configurationConfiguration System IP Subsystem Configuration Resources Application ResourcesTask summary IP telephone configurationConfiguration Telephony Lines Target Lines Dialing plan configurationVoIP trunk configuration Configuration Telephony Sets All DNsConfiguration Telephony Lines Active Physical Lines Configuration Telephony Lines Active VoIP LinesCall routing configuration Redirection and call forward configurationConfiguration Telephony Dialing Plan Routing Task summary NN40140-500 Comparison of CS 1000 and SRG terms and contexts Sheet 1 CS 1000 considerationsCS 1000 and SRG terminology comparison CS 1000 considerationsAC1 Normal and local mode overview Survivability Testing the telephone in local mode Recovery to normal modeVirtual trunk capacity Vacant Number Routing VNRBandwidth management Network Bandwidth Management Nbwm Adaptive Network Bandwidth Management AdbwmAlternative Call Routing ACR To configure SRG for Nbwm and Adbwm Bandwidth management configuration NBWM, ADBWM,Ensure that the DN Type is Public Unknown To configure Alternative Call Routing with did trunksEmergency Services Access ESA configuration To configure on-site notification To configure Emergency Services AccessS1000 Main Office Settings panel S1000 Main Office Settings Sheet 1CS 1000 information for the SRG S1000 Main Office Settings Sheet 2 Field Values Description Node ID To datafill the S1000 Main Office Settings panelCS 1000 considerations S1000 Main Office Settings Sheet 3 MO Access Code LengthIP telephones redirection IP telephones numbers and modelsIP telephone numbers and models Sheet 1 Hardware S1000 IP Terminal Details panelSRG S1000 IP Terminal Details fields Sheet 1 Field Values DescriptionVersion To enter the Motn and BuidTo redirect the telephone to the main office call server Field Values Description FirmwareIP telephone settings Configuration settings for redirected IP PhonesParameter Setting Supported IP clients and firmware versions Firmware upgradeFirmware upgrade procedure Supported firmwareCS 1000 considerations NN40140-500 IP telephones setup and configuration Registration passwordTo set the IP telephone registration password Password registration parameters IP telephones setup and configurationLocal mode indication IP telephone codec and jitter settingsTo change local mode indication To configure DN records for redirected IP telephones Telephone DN records configurationIP telephones setup and configuration Model Button Select the Capabilities and Preferences tabTo map received numbers to the DN Received numbers configurationDhcp settings configuration To configure Dhcp settings for SRG operationCall forwarding options Configuration settings for redirected IP telephones Configuration settings for redirected phonesTest Local Mode To activate Test Local ModeDelayed ring transfer Features in local modeTo exit Test Local Mode and return to Normal Mode Receiver volumeLanguage and Contrast Emergency Services SupportAlarm set Held line reminderIP telephones setup and configuration NN40140-500 IP networking, SRG to WAN, main office to WAN Setting up the private VoIP networkVoIP trunks Setting up the private VoIP networkBasic parameters Basic parameters Sheet 1Parameter Value Context Private dialing plan Setting up the private VoIP network Basic parameters Sheet 2Meridian Customer Defined Network Mcdn To enable Mcdn TATQoS settings codec, jitter buffer, and related items Main office QoS settings Sheet 1Media parameter Settings SIP settings Modules panel, IP Trunks SRG50 Configuration Guide To enter the QoS settings for VoIP trunksNetwork security VoIP trunking configurationFallback configuration To enable fallbackGatekeeper routing To configure gatekeeper settings for H323 trunksCall routing Outgoing calls configurationTo configure routing for outgoing calls Line poolsSelect the Destination Codes tab SRG Pstn access Remote Access Package for VoIP trunksTo configure remote access packages To configure destination codes for the Pstn Pstn destination codes configurationExternal attendant support Main office informationPstn access and analog devices Pstn access considerationsAnalog devices considerations To configure the DNs for analog devices Access to system featuresPstn access and analog devices Select the Capabilities and Preferences tab Pstn access and analog devices NN40140-500 Issue / Problem Probable Cause / Solution TroubleshootingIP telephone troubleshooting IP telephone troubleshooting Sheet 1 Call Server Details Event Id Severity Type Comments Troubleshooting IP telephone troubleshooting Sheet 2 IP terminal details IP Terminal Details Sheet 1Troubleshooting Probable causes for redirection failureIP Terminal Details Sheet 2 IP telephone firmware discrepancies Troubleshooting fallback to local modeIP telephones manual redirection To manually redirect an IP telephone to the main officeCannot clear alarms using an alarm set Troubleshooting NN40140-500 Telephone features in normal and local mode Normal modeLocal mode Telephone features in normal and local mode IP Phone 1110 in Local modeIP Phone 1120E in Local mode IP Phone 1140E in Local modeIntercom/Line IP Phone 2002 in Local mode IP Phone 2001 in Local modeIP Phone 2007 in Local mode IP Phone 2004 in Local modeIP Phone 2033 in Local mode Link key sequences Sheet 1 ATA extension featuresIP 2050 Softphone in Local Mode Feature Activate CancelLink *3 Dialing plan Gatekeeper Gateway H.323 IP telephones Local modeGlossary Branch office Call routingSteering codes Normal mode QoSGlossary Main office, main office call serverIndex 100 101 102