Nortel Networks SRG50 IP telephones setup and configuration, Password registration parameters

Page 54

54Chapter 5 IP telephones setup and configuration

There are three fields that define the password registration process (see the table Password registration parameters on page 54):

Enable registration, Enable global registration password, and Global password.

Table 13 Password registration parameters

Enable registration	Must be selected to allow IP telephones to register.

Enable global registration	Select if a password is going to be entered in the next
password	field, Global password.
	If selected, the installer must enter the Global password
	(below) at the IP telephone before the telephone can be
	configured.

Global password	Enter the password.
	If no password is entered, or the Enable global
	registration password is not selected, no password is
	required to configure the IP telephone.
	Note: Nortel recommends that you synchronize this
	password with the CS 1000 password.

Figure 7 Telephony Resources panel, IP and App Sets

4Select and enter the values to meet the password requirements of your installation.

5Set the Auto-assign DNs check box according to the requirements of your installation (if set, the SRG automatically assigns DNs, see the Device Configuration Guide (NN40020-300) for details).

NN40140-500

Image 54

Contents SRG50 Configuration Guide Copyright 2006-2008 Nortel Networks, All Rights Reserved SRG50 Configuration Guide Task ListNN40140-500 Contents Fallback configuration Gatekeeper routing Glossary NN40140-500 Audience Getting startedAbout this guide AcronymsGetting started Acronyms used in this guide Sheet 2 Getting started Symbols and conventions used in this guideCommand line prompts on display telephones Convention Example Used for Word in a special font shownRelated publications Convention Example Used forHow to get help Getting Help from the Nortel Web siteGetting started NN40140-500 Features SRG 1.5 on BCM SRG50 400 SRG50 overviewBCM50 default IP addresses SRG50 creationPort IP address Subnet mask To activate the SRG keycode BCM50 default user names and passwordsSRG50 keycode activation Click Load FileClick Reboot BCM50 System SRG50 and BCM50 features comparisonTo reboot the system To verify that the SRG has been successfully createdSupported devices SRG50 overview Comparison of BCM50 and SRG50 Sheet 2SRG50 terminology SRG50 terminology Sheet 1Term Description SRG operating modes Normal modeCoordination with the main office call server SRG50 overview SRG50 terminology Sheet 2Normal mode Local mode Local modeSRG installation and configuration summary Automatic registration with the main officeSRG50 overview Process map for installing and configuring an SRG Configuration Resources Application Resources Foundation configurationConfiguration System IP Subsystem Configuration Telephony Global SettingsIP telephone configuration Task summaryConfiguration Telephony Sets All DNs Dialing plan configurationVoIP trunk configuration Configuration Telephony Lines Target LinesConfiguration Telephony Lines Active VoIP Lines Configuration Telephony Lines Active Physical LinesCall routing configuration Redirection and call forward configurationConfiguration Telephony Dialing Plan Routing Task summary NN40140-500 CS 1000 considerations CS 1000 considerationsCS 1000 and SRG terminology comparison Comparison of CS 1000 and SRG terms and contexts Sheet 1AC1 Normal and local mode overview Survivability Recovery to normal mode Testing the telephone in local modeVirtual trunk capacity Vacant Number Routing VNRBandwidth management Network Bandwidth Management Nbwm Adaptive Network Bandwidth Management AdbwmAlternative Call Routing ACR Bandwidth management configuration NBWM, ADBWM, To configure SRG for Nbwm and AdbwmTo configure Alternative Call Routing with did trunks Ensure that the DN Type is Public UnknownEmergency Services Access ESA configuration To configure Emergency Services Access To configure on-site notificationS1000 Main Office Settings panel S1000 Main Office Settings Sheet 1CS 1000 information for the SRG S1000 Main Office Settings Sheet 2 MO Access Code Length To datafill the S1000 Main Office Settings panelCS 1000 considerations S1000 Main Office Settings Sheet 3 Field Values Description Node IDIP telephones redirection IP telephones numbers and modelsIP telephone numbers and models Sheet 1 Field Values Description S1000 IP Terminal Details panelSRG S1000 IP Terminal Details fields Sheet 1 HardwareField Values Description Firmware To enter the Motn and BuidTo redirect the telephone to the main office call server VersionIP telephone settings Configuration settings for redirected IP PhonesParameter Setting Supported firmware Firmware upgradeFirmware upgrade procedure Supported IP clients and firmware versionsCS 1000 considerations NN40140-500 IP telephones setup and configuration Registration passwordTo set the IP telephone registration password IP telephones setup and configuration Password registration parametersLocal mode indication IP telephone codec and jitter settingsTo change local mode indication Telephone DN records configuration To configure DN records for redirected IP telephonesIP telephones setup and configuration Select the Capabilities and Preferences tab Model ButtonReceived numbers configuration To map received numbers to the DNDhcp settings configuration To configure Dhcp settings for SRG operationCall forwarding options To activate Test Local Mode Configuration settings for redirected phonesTest Local Mode Configuration settings for redirected IP telephonesReceiver volume Features in local modeTo exit Test Local Mode and return to Normal Mode Delayed ring transferHeld line reminder Emergency Services SupportAlarm set Language and ContrastIP telephones setup and configuration NN40140-500 Setting up the private VoIP network IP networking, SRG to WAN, main office to WANSetting up the private VoIP network VoIP trunksBasic parameters Basic parameters Sheet 1Parameter Value Context Setting up the private VoIP network Basic parameters Sheet 2 Private dialing planTo enable Mcdn TAT Meridian Customer Defined Network McdnQoS settings codec, jitter buffer, and related items Main office QoS settings Sheet 1Media parameter Settings SIP settings To enter the QoS settings for VoIP trunks Modules panel, IP Trunks SRG50 Configuration GuideTo enable fallback VoIP trunking configurationFallback configuration Network securityTo configure gatekeeper settings for H323 trunks Gatekeeper routingLine pools Outgoing calls configurationTo configure routing for outgoing calls Call routingSelect the Destination Codes tab SRG Pstn access Remote Access Package for VoIP trunksTo configure remote access packages Pstn destination codes configuration To configure destination codes for the PstnMain office information External attendant supportPstn access and analog devices Pstn access considerationsAnalog devices considerations To configure the DNs for analog devices Access to system featuresPstn access and analog devices Select the Capabilities and Preferences tab Pstn access and analog devices NN40140-500 IP telephone troubleshooting Sheet 1 TroubleshootingIP telephone troubleshooting Issue / Problem Probable Cause / SolutionIP Terminal Details Sheet 1 Troubleshooting IP telephone troubleshooting Sheet 2IP terminal details Call Server Details Event Id Severity Type CommentsTroubleshooting Probable causes for redirection failureIP Terminal Details Sheet 2 To manually redirect an IP telephone to the main office Troubleshooting fallback to local modeIP telephones manual redirection IP telephone firmware discrepanciesCannot clear alarms using an alarm set Troubleshooting NN40140-500 Telephone features in normal and local mode Normal modeLocal mode IP Phone 1110 in Local mode Telephone features in normal and local modeIP Phone 1120E in Local mode IP Phone 1140E in Local modeIntercom/Line IP Phone 2001 in Local mode IP Phone 2002 in Local modeIP Phone 2004 in Local mode IP Phone 2007 in Local modeIP Phone 2033 in Local mode Feature Activate Cancel ATA extension featuresIP 2050 Softphone in Local Mode Link key sequences Sheet 1Link *3 Branch office Call routing Gatekeeper Gateway H.323 IP telephones Local modeGlossary Dialing planMain office, main office call server Normal mode QoSGlossary Steering codesIndex 100 101 102