MGE UPS Systems 4000 RT user manual Contents

Contents

1.Presentation

1.1	Standard positions	7
	Tower position	7
	Rack position	7
1.2	Rear panels	8
	Pulsar MX 4000 RT / 5000 RT	8
	Pulsar MX EXB RT (optional battery module)	8
1.3	Display and control panel	9
1.4	Options	9
	Rack mounting kit	9
	ModularEasy MX	10
	Battery extensions for UPS backup times up to 80 minutes	11
	Battery Integration System	11
	Battery extension cable	11

2.Installation

2.1	Unpacking and contents check	12
2.2	Internal batteries connection (Battery start-up)	12
2.3	Installation in tower position	13
2.4	Installation in rack position	14
	Adjustment of the orientation of the logo and control panel	14
	UPS module rack mounting	14
	UPS or battery module rack mounting	15
2.5	Communication ports	16
	Connection to the RS232 communication port	16
	Connection to the communication port by relays	16
	Remote Power Off communication port	17
	Installation of communication cards	17
2.6	Required protective devices and cable cross-sections	18
	Recommended upstream protection	18
	Recommended downstream protection	18
	Required cable cross-sections	18
2.7	Connection of input/output power cables to UPS terminals	19
2.8	Connection of IEC cables to output receptacles	20

3.Operation

3.1	Initial start-up	21
3.2	Final start-up sequence	21
3.3	Operating modes	22
3.4	Operation on battery power	23
3.5	Return on Normal AC source	23
3.6	UPS shutdown	24

4.Access to measurements and personalisation data

4.1	Display organisation	25
4.2	Access to measurements	25
4.3	Access to UPS set-up and maintenance using the control panel	25
4.4	UPS set-up	26
4.5	Maintenance	27
4.6	Personalisation using external software	27

34008030EN/AA - Page 5