4. Operation
4.8 Setup Screen
If the bottom right of the screen (operator firmware version display area) is touched while the Startup screen is displayed, the screen for setting up the Operator Panel appears. When you finished the setup, touch the <OK> button at the bottom right of the screen. To cancel the setup and display the original state, touch the <Cancel> button at the bottom left of the screen.
Startup screen
Setup screen
Language
This item switches the display language for each of the screens. Each touch of the language display area successively switches the display language in the following order: English → Japanese → German → French. The language set here is only for the titles, etc. that are displayed in each screen. To display text strings that are issued in the system history or by the Print command correctly, an Operator Panel configured with the appropriate code pages* must be used.
The settings become valid when the system is next started up. The initial setting at shipment from the manufacturer is English.
* For details on code pages, refer to 5.3 About Display Language.
OP1 Rev.1a | 25 |