Axis Communications 540+, 560 Technical Specification, Supported Printers, Supported Systems

Page 104

Technical Specification

Section 5 Technical Specification

Supported Printers:	All printers except host-based printers (also known as GDI, PPA or Windows-
	based printers).
Supported Systems:
Microsoft Windows:	Windows NT4, Windows 98, Windows Me, Windows 2000, Windows XP,
	Windows Server 2003.
	Print Methods: NetBEUI, LPR, Raw TCP.
Novell NetWare:	NetWare 3.11, 3.12, 4.10, 4.11, 5 and above. Supports bindery emulation and
	NDS. Up to 16 bindery file servers and 96 print queues are served. Supports user
	messages. NDPS supported by versions 4.11 and above.
	Print Methods: NDPS, RPRINTER/NPRINTER, PSERVER.
	LAN Manager:
	LAN Manager 2.0c and above, running under OS/2 ver 1.3 and above.
	Print Method: NetBEUI.
IBM LAN Server:	LAN Server 1.3 and above, running under OS/2 ver 1.3 and above including OS/2
	Warp, OS/2 Warp Connect.
	Print Method: NetBEUI.
LANtastic:	LANtastic 7.0, from any of the supported Windows clients defined above.
	Print Method: NetBEUI.
Additional Systems:	All computers supporting the TCP/IP suite of protocols, including BSD systems:
	BSD 4.2, 4.3, 4.4, SunOS4 (SOLARIS 1.x), DEC Ultrix etc.
System V systems:	R3, R4, AT&T.Interactive, SCO, SUNOS5 (Solaris 2.x), HP-UX, Silicon Graphics
	IRIX, DEC Alpha OSF/1, IBM AIX, BULL (BOS, AIX), Linux.
Other systems:	IBM (MVS, VM, VSE, OS/400), DEC VMS, guidelines for other systems.
	Print Methods: LPD, FTP, PROS (named pipe & filtered), Reverse Telnet.
Apple EtherTalk:	Print Method: AppleTalk Phase 2.

WWW:Netscape Communicator 4.7 and above, Internet Explorer 4.0 and above, Mozilla 1.0 and above.

Supported Protocols:

Windows and OS/2: NetBIOS/NetBEUI or TCP/IP, WINS.

104	AXIS 540+/AXIS 560

Image 104

Contents Axis 540+/AXIS Network Print Servers Axis 540+/AXISRegulatory Information Table of Contents Advanced Installation using Axis NetPilot Section Management and Configuration Using a Web browserUsing Telnet Using Snmp Using Novell Utilities Section Red Hat 7.3 SuSE 8.0About Axis Support Services SectionAbout this Manual Supported EnvironmentsIntroduction Package Contents Product OverviewAxis Network Product CD Adobe Acrobat Reader softwareFor Windows For UNIX/Linux Click index.htm Mac OSBackside label of print server Physical Description Axis 540+Axis Configuration Windows-based printersManagement On page 87 for detailsFeatures and Benefits Basic Installation Quick overviewConnect the Hardware Follow these steps to make your printer network readyAssign an IP Address to the Print Server AssignmentUNIX/Linux performed by editing the file /etc/bootptab Automatic IP address assignmentUsing Rarp UNIX/Linux Using ARP Windows 98/NT Me/2000/XP/2003Open a Command Prompt and enter the following commands Manual IP address assignmentUsing Axis IP JumpStarter Using ARP UNIX/Linux and MacOpen a Terminal and enter the following commands Click OK to save your settings Installation Methods Making Network Printers available for printing on your PCAdding Printers in Windows According to your computer environmentWindows 2000/Windows XP/Windows Server LPT1 LPT2Example 192.168.3.191LPT1 Click Next Adding Printers in Windows Close Add/Remove Programs and the Control Panel Add Printer Wizard. Click NextGo to Start Settings Printers Select ProtocolsAdd TCP\IP Protocol Add Microsoft TCP\IP PrintingList, click Add Port Installing a NetworkPrinter Click Next Axis Print Monitor Software OverviewServer Desired printing protocols are running on your clientAxis 540+/AXIS Axis Ports availableParallel port Serial port Axis 540+ Ports available Parallel port1 Serial port Axis 540+ Close the Printer Ports windowAdding Printers in Windows Example AX100086.LP1 Adding Printers in Windows Installation in Mac OS Adding Printers in MacintoshLaserWriter Printer Driver Installation on MacOS 9.1 or older, using AppleTalkChoosing a Printer Bi-directional Support Verifying the Setup Click the LaserWriter 8.0 iconAdding Printers in Macintosh Write a text file containing the parameters you want to set 192.168.3.191Setting Up NetWare IPX/SPXSetup using Ndps Select TCP/IP default or IPX as network protocol. Click Next Click OKIPX Network protocol TCP/IP Network protocolIP Address and Port, e.g 192.168.70.243 and LPT1 D7e1c200408c5ff6a6400c 400c 401c 402cWhen done, select your printer and click Finish Log in as Admin AXIS5FF66AIPX1Setting Up NetWare Ports available Parallel port Serial port Axis 540+ IPX Network protocol D7e1c200408c5ff6a6 and LPT1 Workstation Click Add. a list of available printers appears Setting Up NetWare Select Network printer and click Next Installing Axis IPP Gateway Configuration Snap For NetWare Axis provides two free Snap-ins for iPrintType TOMCAT33 -STOP Enter Type Nvxadmdn Enter Click on iPrint Management on the left pane Click on Create PrinterSelect default drivers for your printer. Click Next and OK Installing the iPrint Printer on Workstation Http//IP address of your NW server631/IPPBasic Setup with Axis NetPilot Choose the with Installation Wizard optionAXIS1A0003LPT1Q Advanced Installation using Axis NetPilot Axis NetPilot Connect NetWare Print Queues window Installing Axis Network Print Server Basic Queue-based printing over IPPure IP requires that you run NetWare 5 or higher Print Layout Printer StatusNotification Adding Printers in UNIX/Linux Print ToolsClick the Add a new printer button Typical Invocation via a Windows ManagerEdit Printers Typical Invocation from a Terminal Window Debian Invocation Print QueuesRed Hat Driver Then finish the wizard in the usual mannerSuSE Axis axinstall Script Ftp npserverNLPRng is not supported by axinstall Print Methods on TCP/IP Networks Uses industry standard network software on the hostSystems Updating the Firmware Upgrading the FirmwareUpdating the Firmware Open a command prompt from Start = Run Obtaining the SoftwareManagement and Configuration Using a Web browserManagement and Configuration Axis 540+/AXIS Management and Configuration Using Axis ThinWizard for Print Server Management Axis ThinWizard interface appearsAdditional ManagingUpgrading Using FTP for Print Server Management Put config ConfigExample Not visibleUsing Telnet Network Print Server using the Telnet protocolAccount Status Using Snmp Axis 540+/AXIS Management and Configuration Administration NetWarePrinter Status To examineManagement and Configuration Logical Printers Printers Set the parameter Character Set Conversion to IsoibmSet the parameter Character Set Conversion to Decibm Click the OK buttonPrinter. All strings are entered as hexadecimal byte values Select the PR4 tabSelect the PR1 Web Set the Printer Language Translation parameter to Postscr Select the PR2 tab Axis 540+/AXIS100 Axis 540+/AXIS 101 Select Admin Logical Printers and the PR3 tabSet the Physical Port parameter to LPT2 Click the OK button 102 Test Button Axis 540+/AXIS 103Technical Specification Supported PrintersSupported Systems Supported ProtocolsWired Network Attachments Secure ManagementNetwork ManagementPower Consumption DimensionsSafety EnvironmentalIndex TelnetNDS NetWare Advanced installation Basic installation Ndps 38Network Printer Parameter List 82, 103 password Ports Restart Setting up NetWare Snap-in for iPrintPure IP Queue-based printing Axis 540+/AXIS 109Windows, adding printers

Related manuals

Manual 34 pages 20.57 Kb