Axis Communications 540+, 560 user manual Setting Up NetWare, Ipx/Spx

Page 38

Setting Up - NetWare

Section 2Setting Up - NetWare

This section describes how to continue the installation of the AXIS 540+/AXIS 560 in the NetWare environment. Identify which transport protocol you are running on your network and which installation method you should use. Continue the installation by selecting the appropriate installing instructions from the table below:

Installation

Transport

Action

method

protocol

 

 

 

 

NDPS

TCP/IP

See “Setup using NDPS” on page 39.

 

IPX/SPX

- Public Access Printers, on page 40

 

 

- Controlled Access Printers, on page 44

 

 

 

iPrint

iPrint over LPR

See “Setup using iPrint” on page 53.and

 

 

See “Install a printer using AXIS LPR Gateway Configuration

 

 

Snapin” on page 55.

 

 

 

 

iPrint over IPP

See “Setup using iPrint” on page 53.and

 

 

See “Install a printer with AXIS IPP Gateway Configuration

 

 

Snapin” on page 55.

 

 

 

Queue-based

IPX/SPX

To install using the AXIS NetPilot Installation Wizard,

printing

Basic

See “Basic Setup with AXIS NetPilot” on page 58..

 

 

 

Configuration

 

 

 

 

 

IPX/SPX

If you need a more advanced installation that is not covered by

 

Advanced

the AXIS NetPilot Installation Wizard,

 

See “Advanced Installation using AXIS NetPilot” on page 60..

 

configuration

 

 

 

 

 

See “NetWare Administration” on page 64. for information on Novell’s administration tools.

If you intend to operate your AXIS 540+/AXIS 560 in a multi-protocol, mixed environment, you should also proceed to the other relevant sections in this manual.

38

AXIS 540+/AXIS 560

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Axis 540+/AXIS Network Print Servers Axis 540+/AXISRegulatory Information Table of Contents Using Telnet Using Snmp Using Novell Utilities Section Advanced Installation using Axis NetPilotSection Management and Configuration Using a Web browser Red Hat 7.3 SuSE 8.0About this Manual About Axis Support ServicesSection Supported EnvironmentsIntroduction Package Contents Product OverviewFor Windows Axis Network Product CDAdobe Acrobat Reader software For UNIX/Linux Click index.htm Mac OSBackside label of print server Physical Description Axis 540+Axis Management ConfigurationWindows-based printers On page 87 for detailsFeatures and Benefits Connect the Hardware Basic InstallationQuick overview Follow these steps to make your printer network readyAssign an IP Address to the Print Server AssignmentUNIX/Linux performed by editing the file /etc/bootptab Automatic IP address assignmentOpen a Command Prompt and enter the following commands Using Rarp UNIX/LinuxUsing ARP Windows 98/NT Me/2000/XP/2003 Manual IP address assignmentUsing Axis IP JumpStarter Using ARP UNIX/Linux and MacOpen a Terminal and enter the following commands Click OK to save your settings Installation Methods Making Network Printers available for printing on your PCAdding Printers in Windows According to your computer environmentWindows 2000/Windows XP/Windows Server LPT1 LPT2Example 192.168.3.191LPT1 Click Next Adding Printers in Windows Close Add/Remove Programs and the Control Panel Add Printer Wizard. Click NextAdd TCP\IP Protocol Go to Start Settings PrintersSelect Protocols Add Microsoft TCP\IP PrintingList, click Add Port Installing a NetworkPrinter Click Next Server Axis Print Monitor SoftwareOverview Desired printing protocols are running on your clientAxis 540+/AXIS Axis Ports availableParallel port Serial port Axis 540+ Ports available Parallel port1 Serial port Axis 540+ Close the Printer Ports windowAdding Printers in Windows Example AX100086.LP1 Adding Printers in Windows Installation in Mac OS Adding Printers in MacintoshLaserWriter Printer Driver Installation on MacOS 9.1 or older, using AppleTalkChoosing a Printer Bi-directional Support Verifying the Setup Click the LaserWriter 8.0 iconAdding Printers in Macintosh Write a text file containing the parameters you want to set 192.168.3.191Setting Up NetWare IPX/SPXSetup using Ndps Select TCP/IP default or IPX as network protocol. Click Next Click OKIPX Network protocol TCP/IP Network protocolIP Address and Port, e.g 192.168.70.243 and LPT1 D7e1c200408c5ff6a6400c 400c 401c 402cWhen done, select your printer and click Finish Log in as Admin AXIS5FF66AIPX1Setting Up NetWare Ports available Parallel port Serial port Axis 540+ IPX Network protocol D7e1c200408c5ff6a6 and LPT1 Workstation Click Add. a list of available printers appears Setting Up NetWare Select Network printer and click Next Installing Axis IPP Gateway Configuration Snap For NetWare Axis provides two free Snap-ins for iPrintType TOMCAT33 -STOP Enter Type Nvxadmdn Enter Click on iPrint Management on the left pane Click on Create PrinterSelect default drivers for your printer. Click Next and OK Installing the iPrint Printer on Workstation Http//IP address of your NW server631/IPPBasic Setup with Axis NetPilot Choose the with Installation Wizard optionAXIS1A0003LPT1Q Advanced Installation using Axis NetPilot Axis NetPilot Connect NetWare Print Queues window Installing Axis Network Print Server Basic Queue-based printing over IPPure IP requires that you run NetWare 5 or higher Print Layout Printer StatusNotification Adding Printers in UNIX/Linux Print ToolsClick the Add a new printer button Typical Invocation via a Windows ManagerEdit Printers Typical Invocation from a Terminal Window Debian Invocation Print QueuesRed Hat Driver Then finish the wizard in the usual mannerSuSE Axis axinstall Script Ftp npserverNLPRng is not supported by axinstall Print Methods on TCP/IP Networks Uses industry standard network software on the hostSystems Updating the Firmware Upgrading the FirmwareUpdating the Firmware Open a command prompt from Start = Run Obtaining the SoftwareManagement and Configuration Using a Web browserManagement and Configuration Axis 540+/AXIS Management and Configuration Using Axis ThinWizard for Print Server Management Axis ThinWizard interface appearsAdditional ManagingUpgrading Using FTP for Print Server Management Put config ConfigExample Not visibleUsing Telnet Network Print Server using the Telnet protocolAccount Status Using Snmp Axis 540+/AXIS Management and Configuration Printer Status AdministrationNetWare To examineManagement and Configuration Logical Printers Set the parameter Character Set Conversion to Decibm PrintersSet the parameter Character Set Conversion to Isoibm Click the OK buttonPrinter. All strings are entered as hexadecimal byte values Select the PR4 tabSelect the PR1 Web Set the Printer Language Translation parameter to Postscr Select the PR2 tab Axis 540+/AXIS100 Axis 540+/AXIS 101 Select Admin Logical Printers and the PR3 tabSet the Physical Port parameter to LPT2 Click the OK button 102 Test Button Axis 540+/AXIS 103Supported Systems Technical SpecificationSupported Printers Supported ProtocolsNetwork Wired Network AttachmentsSecure Management ManagementSafety Power ConsumptionDimensions EnvironmentalIndex TelnetNDS NetWare Advanced installation Basic installation Ndps 38Pure IP Queue-based printing Network Printer Parameter List 82, 103 password PortsRestart Setting up NetWare Snap-in for iPrint Axis 540+/AXIS 109Windows, adding printers
Related manuals
Manual 34 pages 20.57 Kb
Top Page Image Contents