Setting Up - NetWare
9.You will find the print server in the next window with the printer attached on the connected port. Depending on the transport protocol you used when you start the installation, the print server should appear as following:
•TCP/IP Network protocol:
IP Address and Port, e.g: 192.168.70.243 and LPT1
Only the ports with a connected printer show up in this window. If the printer is not in the displayed print list, click Manually specify the print server and do the following:Enter the Print Servers’ IP address in the IP Address Field and choose a port in the Print Server Port field:
e.g., 192.168.70.243 and LPT1
The available ports are: |
|
|
|
| |||
| Ports available |
| Parallel port 1 |
| Parallel port 2 |
| Serial port |
|
|
| |||||
|
|
|
|
|
|
|
|
| AXIS 540+ |
| LPT1 |
| — |
| — |
| AXIS 560 |
| LPT1 |
| LPT2 |
| COM1 |
|
|
|
|
|
|
|
|
IPX Network protocol:
All the available ports will be presented, regardless if the printers are or not connected to those ports, e.g.
LPT1
LPT2
COM1
AXIS5FF66A_P1
AXIS5FF66A_P2
AXIS5FF66A_P3
AXIS 540+/AXIS 560 | 41 |