Axis Communications 540+, 560 user manual Basic Setup with Axis NetPilot

Page 58

Setting Up - NetWare

Basic Setup with AXIS NetPilot

Install the AXIS NetPilot software on your computer. AXIS NetPilot runs on

Windows 98 and Windows NT.

Starting the Follow the instructions below to install the AXIS 540+/AXIS 560 with AXIS Installation NetPilot:

1.Start AXIS NetPilot by double-clicking the NetPilot icon, which is located in the folder where you installed AXIS NetPilot.

2.Locate the Axis Network Print Server in the ‘New Axis Units’ folder. Select it and click the Install button on the AXIS NetPilot toolbar. If your network is large, it could take a few seconds before the print server appears in the folder.

3.Choose the with Installation Wizard option.

The AXIS NetPilot Installation Wizard guides you through the installation process. The following options are available:

Note:

The number of options varies according to the number of environments you enable.

Print Server Name The default print server name consists of the characters ‘AXIS’ followed by the last six digits of the serial number. If you want to change the print server name, just type the new name in the available text field.

58	AXIS 540+/AXIS 560

Image 58

Contents Axis 540+/AXIS Network Print Servers Axis 540+/AXISRegulatory Information Table of Contents Using Telnet Using Snmp Using Novell Utilities Section Advanced Installation using Axis NetPilotSection Management and Configuration Using a Web browser Red Hat 7.3 SuSE 8.0About this Manual About Axis Support ServicesSection Supported EnvironmentsIntroduction Package Contents Product OverviewFor Windows Axis Network Product CDAdobe Acrobat Reader software For UNIX/Linux Click index.htm Mac OSAxis Physical Description Axis 540+Backside label of print server Management ConfigurationWindows-based printers On page 87 for detailsFeatures and Benefits Connect the Hardware Basic InstallationQuick overview Follow these steps to make your printer network readyAssign an IP Address to the Print Server AssignmentUNIX/Linux performed by editing the file /etc/bootptab Automatic IP address assignmentOpen a Command Prompt and enter the following commands Using Rarp UNIX/LinuxUsing ARP Windows 98/NT Me/2000/XP/2003 Manual IP address assignmentOpen a Terminal and enter the following commands Using ARP UNIX/Linux and MacUsing Axis IP JumpStarter Click OK to save your settings Installation Methods Making Network Printers available for printing on your PCAdding Printers in Windows According to your computer environmentWindows 2000/Windows XP/Windows Server LPT1 LPT2Example 192.168.3.191LPT1 Click Next Adding Printers in Windows Close Add/Remove Programs and the Control Panel Add Printer Wizard. Click NextAdd TCP\IP Protocol Go to Start Settings PrintersSelect Protocols Add Microsoft TCP\IP PrintingPrinter Click Next Installing a NetworkList, click Add Port Server Axis Print Monitor SoftwareOverview Desired printing protocols are running on your clientAxis 540+/AXIS Parallel port Serial port Axis 540+ Ports availableAxis Ports available Parallel port1 Serial port Axis 540+ Close the Printer Ports windowAdding Printers in Windows Example AX100086.LP1 Adding Printers in Windows Installation in Mac OS Adding Printers in MacintoshChoosing a Printer Installation on MacOS 9.1 or older, using AppleTalkLaserWriter Printer Driver Bi-directional Support Verifying the Setup Click the LaserWriter 8.0 iconAdding Printers in Macintosh Write a text file containing the parameters you want to set 192.168.3.191Setting Up NetWare IPX/SPXSetup using Ndps Select TCP/IP default or IPX as network protocol. Click Next Click OKIP Address and Port, e.g 192.168.70.243 and LPT1 TCP/IP Network protocolIPX Network protocol D7e1c200408c5ff6a6400c 400c 401c 402cWhen done, select your printer and click Finish Log in as Admin AXIS5FF66AIPX1Setting Up NetWare Ports available Parallel port Serial port Axis 540+ IPX Network protocol D7e1c200408c5ff6a6 and LPT1 Workstation Click Add. a list of available printers appears Setting Up NetWare Select Network printer and click Next Installing Axis IPP Gateway Configuration Snap For NetWare Axis provides two free Snap-ins for iPrintType TOMCAT33 -STOP Enter Type Nvxadmdn Enter Click on iPrint Management on the left pane Click on Create PrinterSelect default drivers for your printer. Click Next and OK Installing the iPrint Printer on Workstation Http//IP address of your NW server631/IPPBasic Setup with Axis NetPilot Choose the with Installation Wizard optionAXIS1A0003LPT1Q Advanced Installation using Axis NetPilot Axis NetPilot Connect NetWare Print Queues window Installing Axis Network Print Server Basic Queue-based printing over IPPure IP requires that you run NetWare 5 or higher Notification Printer StatusPrint Layout Adding Printers in UNIX/Linux Print ToolsEdit Printers Typical Invocation via a Windows ManagerClick the Add a new printer button Typical Invocation from a Terminal Window Debian Invocation Print QueuesRed Hat Driver Then finish the wizard in the usual mannerSuSE Axis axinstall Script Ftp npserverNLPRng is not supported by axinstall Print Methods on TCP/IP Networks Uses industry standard network software on the hostSystems Updating the Firmware Upgrading the FirmwareUpdating the Firmware Open a command prompt from Start = Run Obtaining the SoftwareManagement and Configuration Using a Web browserManagement and Configuration Axis 540+/AXIS Management and Configuration Using Axis ThinWizard for Print Server Management Axis ThinWizard interface appearsUpgrading ManagingAdditional Using FTP for Print Server Management Put config ConfigExample Not visibleUsing Telnet Network Print Server using the Telnet protocolAccount Status Using Snmp Axis 540+/AXIS Management and Configuration Printer Status AdministrationNetWare To examineManagement and Configuration Logical Printers Set the parameter Character Set Conversion to Decibm PrintersSet the parameter Character Set Conversion to Isoibm Click the OK buttonPrinter. All strings are entered as hexadecimal byte values Select the PR4 tabSelect the PR1 Web Set the Printer Language Translation parameter to Postscr Select the PR2 tab Axis 540+/AXIS100 Set the Physical Port parameter to LPT2 Click the OK button Select Admin Logical Printers and the PR3 tabAxis 540+/AXIS 101 102 Test Button Axis 540+/AXIS 103Supported Systems Technical SpecificationSupported Printers Supported ProtocolsNetwork Wired Network AttachmentsSecure Management ManagementSafety Power ConsumptionDimensions EnvironmentalIndex TelnetNDS NetWare Advanced installation Basic installation Ndps 38Pure IP Queue-based printing Network Printer Parameter List 82, 103 password PortsRestart Setting up NetWare Snap-in for iPrint Axis 540+/AXIS 109Windows, adding printers

Related manuals

Manual 34 pages 20.57 Kb