Axis Communications 540+ Go to Start Settings Printers, Select Protocols, Add TCP\IP Protocol

Adding Printers in Windows

Client/Server Printing	Select Network printer instead of Local Printer in Step 2 above if your print
	server has already been installed by the administrator on another computer.
	Follow the instructions in the Add Printer Wizard to complete the installation.
Important!
		•	Make sure that the Automatically detect and install my Plug and Play printer checkbox
			is not checked
		•	Press F1 to access the Windows online help system if you need additional help when
			installing a printer/print server using this method.
Alternative Method for	If you wish to print over LPR but do not wish to install Print Services for Unix
LPR Printing	you can do this by changing the printing protocol after having installed the
	printer using the Standard TCP/IP method, see “Windows 2000/Windows
	XP/Windows Server 2003” on page 20 for instructions.
	Once the printer is installed, follow these instructions to change the printing
	protocol:
	1.		Go to Start Settings Printers.
	2.		Double-click the installed printer.
	3.		Select Properties from the Printer menu.
	4.		Click the Ports tab.
	5.		Click the Configure Port button.
	6.		Click the LPR radio button and enter the queue name (PR1, PR2...).
	7.		Click OK to finish.

Adding Printers in Windows NT4 using the Microsoft LPR Monitor

If you have not already done so, you should perform the TCP/IP basic setup procedures prior to installing a printer for LPR printing.

Preparing for	In the Control Panel, double-click the Network icon. Select the Services tab. If
LPR Printing	the TCP/IP Printing entry appears, then TCP/IP is already installed. Close the
	Network folder and go on to Installing an LPR printer, below.
	First, prepare for LPR printing:
	1.	Open the Control Panel and double-click the Network icon.
	2.	Select Protocols.
	3.	Add TCP\IP Protocol.
	4.	Select Services.
	5.	Add Microsoft TCP\IP Printing.

24 AXIS 540+/AXIS 560