Axis Communications 560, 540+ user manual Example AX100086.LP1

Page 31

Adding Printers in Windows

Configure the Port: 1. Select Settings Printers from the Start menu and highlight the printer you wish to configure. Select File Properties Details and click Port Settings.

2.Choose whether error condition pop-up messages are to be displayed by checking the box in the Configure AXIS Ports dialog. Define the frequency at which the error messages should be displayed after retry. Click OK.

Note:

Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the print driver provided with the printer. This assures you of the latest driver software.

Adding Printers in Windows 98 and Me over NetBIOS/NetBEUI using AXIS Print Monitor

Follow the procedures below to install Axis NetBIOS/NetBEUI printer ports on a

Windows 98 workstation, using AXIS Print Monitor:

1.To start the Add Printer Wizard, select Settings Printers from the Start menu and double-click the Add Printer icon.

2.After clicking Next in the first dialog, the Wizard asks you to select Local printer or Network printer. Select Local printer. Click Next.

3.Choose the appropriate printer driver for your printer. If the desired printer driver appears in the displayed Manufacturers and Printers lists, highlight your selection, click Next and proceed directly to step 6. It is only necessary to perform steps 4 - 5 if your printer does not appear in the model list.

Note:

Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the printer driver provided with the printer. This assures you of the latest driver software.

4.Click the Have Disk... button. Insert the printer driver diskette/CD that was provided with your printer, select the appropriate diskette/CD drive and click OK.

5.Select the printer driver you want to install and click Next.

6.Select the AXIS Printer Port from the Available Ports list. The port names appears as <name>.<port>. Here, <name> is AX followed by the last six digits of the print server’s serial number (e.g. AX100086) and <port> is taken from the table below. Click the Configure Port button.

	Ports available	Parallel port1	Parallel port 2	Serial port

	AXIS 540+	LP1	—	—
	AXIS 560	LP1	LP2	CM1
	Example: AX100086.LP1

AXIS 540+/AXIS 560				31

Image 31

Contents Axis 540+/AXIS Axis 540+/AXIS Network Print ServersRegulatory Information Table of Contents Red Hat 7.3 SuSE 8.0 Advanced Installation using Axis NetPilotSection Management and Configuration Using a Web browser Using Telnet Using Snmp Using Novell Utilities SectionSupported Environments About Axis Support ServicesSection About this ManualIntroduction Product Overview Package ContentsFor UNIX/Linux Click index.htm Mac OS Axis Network Product CDAdobe Acrobat Reader software For WindowsAxis Physical Description Axis 540+Backside label of print server On page 87 for details ConfigurationWindows-based printers ManagementFeatures and Benefits Follow these steps to make your printer network ready Basic InstallationQuick overview Connect the HardwareAssignment Assign an IP Address to the Print ServerAutomatic IP address assignment UNIX/Linux performed by editing the file /etc/bootptabManual IP address assignment Using Rarp UNIX/LinuxUsing ARP Windows 98/NT Me/2000/XP/2003 Open a Command Prompt and enter the following commandsOpen a Terminal and enter the following commands Using ARP UNIX/Linux and MacUsing Axis IP JumpStarter Click OK to save your settings Making Network Printers available for printing on your PC Installation MethodsAccording to your computer environment Adding Printers in WindowsLPT1 LPT2 Windows 2000/Windows XP/Windows ServerExample 192.168.3.191LPT1 Click Next Adding Printers in Windows Add Printer Wizard. Click Next Close Add/Remove Programs and the Control PanelAdd Microsoft TCP\IP Printing Go to Start Settings PrintersSelect Protocols Add TCP\IP ProtocolPrinter Click Next Installing a NetworkList, click Add Port Desired printing protocols are running on your client Axis Print Monitor SoftwareOverview ServerAxis 540+/AXIS Parallel port Serial port Axis 540+ Ports availableAxis Close the Printer Ports window Ports available Parallel port1 Serial port Axis 540+Adding Printers in Windows Example AX100086.LP1 Adding Printers in Windows Adding Printers in Macintosh Installation in Mac OSChoosing a Printer Installation on MacOS 9.1 or older, using AppleTalkLaserWriter Printer Driver Click the LaserWriter 8.0 icon Bi-directional Support Verifying the SetupAdding Printers in Macintosh 192.168.3.191 Write a text file containing the parameters you want to setIPX/SPX Setting Up NetWareSetup using Ndps Click OK Select TCP/IP default or IPX as network protocol. Click NextIP Address and Port, e.g 192.168.70.243 and LPT1 TCP/IP Network protocolIPX Network protocol 400c 401c 402c D7e1c200408c5ff6a6400cWhen done, select your printer and click Finish AXIS5FF66AIPX1 Log in as AdminSetting Up NetWare Ports available Parallel port Serial port Axis 540+ IPX Network protocol D7e1c200408c5ff6a6 and LPT1 Workstation Click Add. a list of available printers appears Setting Up NetWare Select Network printer and click Next Axis provides two free Snap-ins for iPrint Installing Axis IPP Gateway Configuration Snap For NetWareType TOMCAT33 -STOP Enter Type Nvxadmdn Enter Click on Create Printer Click on iPrint Management on the left paneSelect default drivers for your printer. Click Next and OK Http//IP address of your NW server631/IPP Installing the iPrint Printer on WorkstationChoose the with Installation Wizard option Basic Setup with Axis NetPilotAXIS1A0003LPT1Q Advanced Installation using Axis NetPilot Axis NetPilot Connect NetWare Print Queues window Basic Queue-based printing over IP Installing Axis Network Print ServerPure IP requires that you run NetWare 5 or higher Notification Printer StatusPrint Layout Print Tools Adding Printers in UNIX/LinuxEdit Printers Typical Invocation via a Windows ManagerClick the Add a new printer button Typical Invocation from a Terminal Window Invocation Print Queues DebianRed Hat Then finish the wizard in the usual manner DriverSuSE Ftp npserver Axis axinstall ScriptNLPRng is not supported by axinstall Uses industry standard network software on the host Print Methods on TCP/IP NetworksSystems Upgrading the Firmware Updating the FirmwareUpdating the Firmware Obtaining the Software Open a command prompt from Start = RunUsing a Web browser Management and ConfigurationManagement and Configuration Axis 540+/AXIS Management and Configuration Axis ThinWizard interface appears Using Axis ThinWizard for Print Server ManagementUpgrading ManagingAdditional Put config Config Using FTP for Print Server ManagementNot visible ExampleNetwork Print Server using the Telnet protocol Using TelnetAccount Status Using Snmp Axis 540+/AXIS Management and Configuration To examine AdministrationNetWare Printer StatusManagement and Configuration Logical Printers Click the OK button PrintersSet the parameter Character Set Conversion to Isoibm Set the parameter Character Set Conversion to DecibmSelect the PR4 tab Printer. All strings are entered as hexadecimal byte valuesSelect the PR1 Web Select the PR2 tab Axis 540+/AXIS Set the Printer Language Translation parameter to Postscr100 Set the Physical Port parameter to LPT2 Click the OK button Select Admin Logical Printers and the PR3 tabAxis 540+/AXIS 101 102 Axis 540+/AXIS 103 Test ButtonSupported Protocols Technical SpecificationSupported Printers Supported SystemsManagement Wired Network AttachmentsSecure Management NetworkEnvironmental Power ConsumptionDimensions SafetyTelnet IndexNdps 38 NDS NetWare Advanced installation Basic installationAxis 540+/AXIS 109 Network Printer Parameter List 82, 103 password PortsRestart Setting up NetWare Snap-in for iPrint Pure IP Queue-based printingWindows, adding printers

Related manuals

Manual 34 pages 20.57 Kb