Axis Communications 560, 540+ user manual Setup using Ndps

Page 39

Setting Up - NetWare

Setup using NDPS

The AXIS 540+/AXIS 560 supports Novell Distributed Print Services (NDPS). You can run NDPS over Pure IP (TCP/IP) or IPX/SPX.

Before the AXIS 540+/AXIS 560 can be installed, make sure that NDPS is installed and a Broker is loaded on your NetWare file server.

Axis Network Print Server uses the AXIS NDPS Gateway for printing in networks using either IP or IPX as transport protocols. The printer gateways are included with the NDPS software (from version 5.1 and up) and are automatically installed together with NDPS.

Note:

NDPS requires that you run NetWare 4.11 or higher. Pure IP is only supported by NetWare 5 or higher.

Installing the Axis Having assigned an IP address to the AXIS 540+/AXIS 560 as described in Network Print Server Assign an IP Address to the Print Server, on page 13, you are now ready to install

in the NDPS the Axis Network Print Server for NDPS printing. You can select to install the environments connected printers as public or controlled access printers. Follow the

instructions below to install the Axis Network Print Server using NDPS:

Important:

•The NDPS Enabled parameter of the Axis Network Print Server must be set to Yes in order for the communication between the print server and the NDPS gateway to be enabled. To change this parameter, log in to the print server’s web pages and choose: Admin => Network Set- tings=> Detailed View=> NetWare=> NDPS Enabled => Yes.

•If you do not have an NDPS Manager object available, start out with creating one in the Net- Ware Administrator.

AXIS 540+/AXIS 560

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Axis 540+/AXIS Axis 540+/AXIS Network Print ServersRegulatory Information Table of Contents Red Hat 7.3 SuSE 8.0 Advanced Installation using Axis NetPilotSection Management and Configuration Using a Web browser Using Telnet Using Snmp Using Novell Utilities SectionSupported Environments About Axis Support ServicesSection About this ManualIntroduction Product Overview Package ContentsFor UNIX/Linux Click index.htm Mac OS Axis Network Product CDAdobe Acrobat Reader software For WindowsPhysical Description Axis 540+ AxisBackside label of print server On page 87 for details ConfigurationWindows-based printers ManagementFeatures and Benefits Follow these steps to make your printer network ready Basic InstallationQuick overview Connect the HardwareAssignment Assign an IP Address to the Print ServerAutomatic IP address assignment UNIX/Linux performed by editing the file /etc/bootptabManual IP address assignment Using Rarp UNIX/LinuxUsing ARP Windows 98/NT Me/2000/XP/2003 Open a Command Prompt and enter the following commandsUsing ARP UNIX/Linux and Mac Open a Terminal and enter the following commandsUsing Axis IP JumpStarter Click OK to save your settings Making Network Printers available for printing on your PC Installation MethodsAccording to your computer environment Adding Printers in WindowsLPT1 LPT2 Windows 2000/Windows XP/Windows ServerExample 192.168.3.191LPT1 Click Next Adding Printers in Windows Add Printer Wizard. Click Next Close Add/Remove Programs and the Control PanelAdd Microsoft TCP\IP Printing Go to Start Settings PrintersSelect Protocols Add TCP\IP ProtocolInstalling a Network Printer Click NextList, click Add Port Desired printing protocols are running on your client Axis Print Monitor SoftwareOverview ServerAxis 540+/AXIS Ports available Parallel port Serial port Axis 540+Axis Close the Printer Ports window Ports available Parallel port1 Serial port Axis 540+Adding Printers in Windows Example AX100086.LP1 Adding Printers in Windows Adding Printers in Macintosh Installation in Mac OSInstallation on MacOS 9.1 or older, using AppleTalk Choosing a PrinterLaserWriter Printer Driver Click the LaserWriter 8.0 icon Bi-directional Support Verifying the SetupAdding Printers in Macintosh 192.168.3.191 Write a text file containing the parameters you want to setIPX/SPX Setting Up NetWareSetup using Ndps Click OK Select TCP/IP default or IPX as network protocol. Click NextTCP/IP Network protocol IP Address and Port, e.g 192.168.70.243 and LPT1IPX Network protocol 400c 401c 402c D7e1c200408c5ff6a6400cWhen done, select your printer and click Finish AXIS5FF66AIPX1 Log in as AdminSetting Up NetWare Ports available Parallel port Serial port Axis 540+ IPX Network protocol D7e1c200408c5ff6a6 and LPT1 Workstation Click Add. a list of available printers appears Setting Up NetWare Select Network printer and click Next Axis provides two free Snap-ins for iPrint Installing Axis IPP Gateway Configuration Snap For NetWareType TOMCAT33 -STOP Enter Type Nvxadmdn Enter Click on Create Printer Click on iPrint Management on the left paneSelect default drivers for your printer. Click Next and OK Http//IP address of your NW server631/IPP Installing the iPrint Printer on WorkstationChoose the with Installation Wizard option Basic Setup with Axis NetPilotAXIS1A0003LPT1Q Advanced Installation using Axis NetPilot Axis NetPilot Connect NetWare Print Queues window Basic Queue-based printing over IP Installing Axis Network Print ServerPure IP requires that you run NetWare 5 or higher Printer Status NotificationPrint Layout Print Tools Adding Printers in UNIX/LinuxTypical Invocation via a Windows Manager Edit PrintersClick the Add a new printer button Typical Invocation from a Terminal Window Invocation Print Queues DebianRed Hat Then finish the wizard in the usual manner DriverSuSE Ftp npserver Axis axinstall ScriptNLPRng is not supported by axinstall Uses industry standard network software on the host Print Methods on TCP/IP NetworksSystems Upgrading the Firmware Updating the FirmwareUpdating the Firmware Obtaining the Software Open a command prompt from Start = RunUsing a Web browser Management and ConfigurationManagement and Configuration Axis 540+/AXIS Management and Configuration Axis ThinWizard interface appears Using Axis ThinWizard for Print Server ManagementManaging UpgradingAdditional Put config Config Using FTP for Print Server ManagementNot visible ExampleNetwork Print Server using the Telnet protocol Using TelnetAccount Status Using Snmp Axis 540+/AXIS Management and Configuration To examine AdministrationNetWare Printer StatusManagement and Configuration Logical Printers Click the OK button PrintersSet the parameter Character Set Conversion to Isoibm Set the parameter Character Set Conversion to DecibmSelect the PR4 tab Printer. All strings are entered as hexadecimal byte valuesSelect the PR1 Web Select the PR2 tab Axis 540+/AXIS Set the Printer Language Translation parameter to Postscr100 Select Admin Logical Printers and the PR3 tab Set the Physical Port parameter to LPT2 Click the OK buttonAxis 540+/AXIS 101 102 Axis 540+/AXIS 103 Test ButtonSupported Protocols Technical SpecificationSupported Printers Supported SystemsManagement Wired Network AttachmentsSecure Management NetworkEnvironmental Power ConsumptionDimensions SafetyTelnet IndexNdps 38 NDS NetWare Advanced installation Basic installationAxis 540+/AXIS 109 Network Printer Parameter List 82, 103 password PortsRestart Setting up NetWare Snap-in for iPrint Pure IP Queue-based printingWindows, adding printers
Related manuals
Manual 34 pages 20.57 Kb
Top Page Image Contents