Axis Communications 560 Secure Management, Logical Connection, Wired Network Attachments

Page 105

 

 

Technical Specification

 

NetWare:

IPX, IP, iPrint, SAP, RIP, SPX and NCP (extended with NDS), NDPS, NLSP, DIAG,

 

 

LIP.

 

LAN Manager /LAN

NetBIOS/NetBEUI.

 

Server:

 

 

 

LANtastic:

NetBIOS/NetBEUI.

 

TCP/IP:

LPD, FTP, Telnet, Reverse Telnet, PROS, BOOTP, ARP, RARP, DHCP, ICMP, IGMP,

 

 

IP, TCP, UDP, HTTP, TFTP, SLP, Raw TCP, IPP, AutoIP, DDNS.

 

Apple EtherTalk:

AAPR, ATP, DDP, NBP, PAP, RTMP, ZIP.

 

Secure Management:

SSL 2.0, 3.0, TLS 1.0, HTTPS

 

NetWare:

Encrypted passwords, NetWare Packet Signature Level 1, 2, 3.

 

UNIX/Linux:

Root password, user access list and printer access.

 

Network

Print server/job/printer status presentation and management via

 

Management:

NWAdmin/PCONSOLE. AXIS ThinWizard for monitoring, configuration and

 

 

firmware upgrade.

 

Logical Connection:

 

 

 

Ethernet:

Use of IEEE 802.2, IEEE 802.3, SNAP and Ethernet II frame types simultaneously.

 

Fast Ethernet:

Supports NWay that provides auto-detection of network speed. Use of IEEE

 

 

802.2, IEEE 802.3, SNAP and Ethernet II frame types simultaneously, full duplex.

 

Wired Network

 

 

 

Attachments:

 

 

 

Ethernet:

RJ-45 connector (Category 5 twisted pair cable) for 10baseT Ethernet or

 

 

100base TX Fast Ethernet.

 

Logical Printers:

Logical printer ports can be programmed to perform auto ASCII-to-PostScript

 

 

conversion, string before and after job, string substitution, alternative output

 

 

and character set conversion.

 

Printer Ports:

• AXIS 540+: Parallel port: 36-pin Centronics connector. Highspeed IEEE 1284

 

 

compliant with ECP support and throughput of 1 MB/sec.

 

 

• AXIS 560: 25-pin DSUB connector. Highspeed IEEE 1284 compliant with ECP

 

 

 

 

 

AXIS 540+/AXIS 560

105

 

Page 104 Page 106
Image 105
Page 104 Page 106
Contents Axis 540+/AXIS Axis 540+/AXIS Network Print ServersRegulatory Information Table of Contents Section Management and Configuration Using a Web browser Advanced Installation using Axis NetPilotUsing Telnet Using Snmp Using Novell Utilities Section Red Hat 7.3 SuSE 8.0Section About Axis Support ServicesAbout this Manual Supported EnvironmentsIntroduction Product Overview Package ContentsAdobe Acrobat Reader software Axis Network Product CDFor Windows For UNIX/Linux Click index.htm Mac OSPhysical Description Axis 540+ AxisBackside label of print server Windows-based printers ConfigurationManagement On page 87 for detailsFeatures and Benefits Quick overview Basic InstallationConnect the Hardware Follow these steps to make your printer network readyAssignment Assign an IP Address to the Print ServerAutomatic IP address assignment UNIX/Linux performed by editing the file /etc/bootptabUsing ARP Windows 98/NT Me/2000/XP/2003 Using Rarp UNIX/LinuxOpen a Command Prompt and enter the following commands Manual IP address assignmentUsing ARP UNIX/Linux and Mac Open a Terminal and enter the following commandsUsing Axis IP JumpStarter Click OK to save your settings Making Network Printers available for printing on your PC Installation MethodsAccording to your computer environment Adding Printers in WindowsLPT1 LPT2 Windows 2000/Windows XP/Windows ServerExample 192.168.3.191LPT1 Click Next Adding Printers in Windows Add Printer Wizard. Click Next Close Add/Remove Programs and the Control PanelSelect Protocols Go to Start Settings PrintersAdd TCP\IP Protocol Add Microsoft TCP\IP PrintingInstalling a Network Printer Click NextList, click Add Port Overview Axis Print Monitor SoftwareServer Desired printing protocols are running on your clientAxis 540+/AXIS Ports available Parallel port Serial port Axis 540+Axis Close the Printer Ports window Ports available Parallel port1 Serial port Axis 540+Adding Printers in Windows Example AX100086.LP1 Adding Printers in Windows Adding Printers in Macintosh Installation in Mac OSInstallation on MacOS 9.1 or older, using AppleTalk Choosing a PrinterLaserWriter Printer Driver Click the LaserWriter 8.0 icon Bi-directional Support Verifying the SetupAdding Printers in Macintosh 192.168.3.191 Write a text file containing the parameters you want to setIPX/SPX Setting Up NetWareSetup using Ndps Click OK Select TCP/IP default or IPX as network protocol. Click NextTCP/IP Network protocol IP Address and Port, e.g 192.168.70.243 and LPT1IPX Network protocol 400c 401c 402c D7e1c200408c5ff6a6400cWhen done, select your printer and click Finish AXIS5FF66AIPX1 Log in as AdminSetting Up NetWare Ports available Parallel port Serial port Axis 540+ IPX Network protocol D7e1c200408c5ff6a6 and LPT1 Workstation Click Add. a list of available printers appears Setting Up NetWare Select Network printer and click Next Axis provides two free Snap-ins for iPrint Installing Axis IPP Gateway Configuration Snap For NetWareType TOMCAT33 -STOP Enter Type Nvxadmdn Enter Click on Create Printer Click on iPrint Management on the left paneSelect default drivers for your printer. Click Next and OK Http//IP address of your NW server631/IPP Installing the iPrint Printer on WorkstationChoose the with Installation Wizard option Basic Setup with Axis NetPilotAXIS1A0003LPT1Q Advanced Installation using Axis NetPilot Axis NetPilot Connect NetWare Print Queues window Basic Queue-based printing over IP Installing Axis Network Print ServerPure IP requires that you run NetWare 5 or higher Printer Status NotificationPrint Layout Print Tools Adding Printers in UNIX/LinuxTypical Invocation via a Windows Manager Edit PrintersClick the Add a new printer button Typical Invocation from a Terminal Window Invocation Print Queues DebianRed Hat Then finish the wizard in the usual manner DriverSuSE Ftp npserver Axis axinstall ScriptNLPRng is not supported by axinstall Uses industry standard network software on the host Print Methods on TCP/IP NetworksSystems Upgrading the Firmware Updating the FirmwareUpdating the Firmware Obtaining the Software Open a command prompt from Start = RunUsing a Web browser Management and ConfigurationManagement and Configuration Axis 540+/AXIS Management and Configuration Axis ThinWizard interface appears Using Axis ThinWizard for Print Server ManagementManaging UpgradingAdditional Put config Config Using FTP for Print Server ManagementNot visible ExampleNetwork Print Server using the Telnet protocol Using TelnetAccount Status Using Snmp Axis 540+/AXIS Management and Configuration NetWare AdministrationPrinter Status To examineManagement and Configuration Logical Printers Set the parameter Character Set Conversion to Isoibm PrintersSet the parameter Character Set Conversion to Decibm Click the OK buttonSelect the PR4 tab Printer. All strings are entered as hexadecimal byte valuesSelect the PR1 Web Select the PR2 tab Axis 540+/AXIS Set the Printer Language Translation parameter to Postscr100 Select Admin Logical Printers and the PR3 tab Set the Physical Port parameter to LPT2 Click the OK buttonAxis 540+/AXIS 101 102 Axis 540+/AXIS 103 Test ButtonSupported Printers Technical SpecificationSupported Systems Supported ProtocolsSecure Management Wired Network AttachmentsNetwork ManagementDimensions Power ConsumptionSafety EnvironmentalTelnet IndexNdps 38 NDS NetWare Advanced installation Basic installationRestart Setting up NetWare Snap-in for iPrint Network Printer Parameter List 82, 103 password PortsPure IP Queue-based printing Axis 540+/AXIS 109Windows, adding printers
Related manuals
Manual 34 pages 20.57 Kb
Top Page Image Contents