Management and Configuration
Viewing The status command shows which printer port the logical printers are assigned the Status file to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS window (Windows and OS/2) or in a UNIX shell.
2.Enter the user id and the password. (The default entries are root and pass.)
3.View the status file by typing:
status
Performing resets Three types of reset commands allow you to perform soft resets, to perform hard resets, and to reset the print server’s parameters to its default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS window (Windows and OS/2) or in a UNIX shell.
2.Enter the user id and the password. (The default entries are root and pass.)
3.Restart the print server’s protocols by typing:
softreset
Replace the command in step 3 above with hardreset or default to perform the other two reset operations.
AXIS 540+/AXIS 560 | 89 |