Axis Communications 560 user manual Ports available Parallel port1 Serial port Axis 540+

Page 29

Adding Printers in Windows

Adding Printers over NetBIOS/NetBEUI in Windows NT 4 using AXIS Print Monitor

See to it that the NetBEUI protocol is installed on your client. Follow the procedure below to install Axis Printer Ports from a Windows NT 4.0 workstation:

1.Install AXIS PrintMonitor on all workstations that will print via the print server.

2.To start the Add Printer Wizard, select Settings Printers from the Start menu and double-click the Add Printer icon.

3.The Wizard asks you to select My Computer or Network printer server. Select My Computer. Click Next.

4.Click Add Port... In the Available Ports dialog, select AXIS Port and click New Port...

5.Select NetBIOS/NetBEUI as your choice of network protocol and click OK.

6.Select the AXIS Port you want to add from the list of available ports. The port appears as <name>.<port> (Example: AX100086.LP1). The <port> is taken from the table below. Click OK.

Ports available

Parallel port1

Parallel port 2

Serial port

 

 

 

 

AXIS 540+

LP1

—

—

AXIS 560

LP1

LP2

CM1

 

 

 

 

7.Close the Printer Ports window.

8.Click the Configure Port... button. Choose whether error condition pop-up messages are to be displayed by checking the box in the Configure Axis Ports dialog. Define the frequency at which the error messages should be displayed after retry. Click OK. Continue the installation by clicking Next.

9.Choose the appropriate printer driver for your printer. Click Next and proceed directly to step 12. It is only necessary to perform steps 10-11 if your printer does not appear in the list.

Note:

Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the printer driver provided with the printer. This assures you of the latest driver software.

10.Click the Have Disk... button. Insert the printer driver diskette/CD that was provided with your printer, select the appropriate diskette/CD drive and click OK.

11.Select the printer driver you want to install and click Next.

12.Enter an appropriate name for your printer and click Next.

13.Choose whether you want to share the printer with other network users and click Next.

14.Choose whether you want to print a test page and then click Finish.

AXIS 540+/AXIS 560

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Axis 540+/AXIS Axis 540+/AXIS Network Print ServersRegulatory Information Table of Contents Section Management and Configuration Using a Web browser Advanced Installation using Axis NetPilotUsing Telnet Using Snmp Using Novell Utilities Section Red Hat 7.3 SuSE 8.0Section About Axis Support ServicesAbout this Manual Supported EnvironmentsIntroduction Product Overview Package ContentsAdobe Acrobat Reader software Axis Network Product CDFor Windows For UNIX/Linux Click index.htm Mac OSBackside label of print server Physical Description Axis 540+Axis Windows-based printers ConfigurationManagement On page 87 for detailsFeatures and Benefits Quick overview Basic InstallationConnect the Hardware Follow these steps to make your printer network readyAssignment Assign an IP Address to the Print ServerAutomatic IP address assignment UNIX/Linux performed by editing the file /etc/bootptabUsing ARP Windows 98/NT Me/2000/XP/2003 Using Rarp UNIX/LinuxOpen a Command Prompt and enter the following commands Manual IP address assignmentUsing Axis IP JumpStarter Using ARP UNIX/Linux and MacOpen a Terminal and enter the following commands Click OK to save your settings Making Network Printers available for printing on your PC Installation MethodsAccording to your computer environment Adding Printers in WindowsLPT1 LPT2 Windows 2000/Windows XP/Windows ServerExample 192.168.3.191LPT1 Click Next Adding Printers in Windows Add Printer Wizard. Click Next Close Add/Remove Programs and the Control PanelSelect Protocols Go to Start Settings PrintersAdd TCP\IP Protocol Add Microsoft TCP\IP PrintingList, click Add Port Installing a NetworkPrinter Click Next Overview Axis Print Monitor SoftwareServer Desired printing protocols are running on your clientAxis 540+/AXIS Axis Ports availableParallel port Serial port Axis 540+ Close the Printer Ports window Ports available Parallel port1 Serial port Axis 540+Adding Printers in Windows Example AX100086.LP1 Adding Printers in Windows Adding Printers in Macintosh Installation in Mac OSLaserWriter Printer Driver Installation on MacOS 9.1 or older, using AppleTalkChoosing a Printer Click the LaserWriter 8.0 icon Bi-directional Support Verifying the SetupAdding Printers in Macintosh 192.168.3.191 Write a text file containing the parameters you want to setIPX/SPX Setting Up NetWareSetup using Ndps Click OK Select TCP/IP default or IPX as network protocol. Click NextIPX Network protocol TCP/IP Network protocolIP Address and Port, e.g 192.168.70.243 and LPT1 400c 401c 402c D7e1c200408c5ff6a6400cWhen done, select your printer and click Finish AXIS5FF66AIPX1 Log in as AdminSetting Up NetWare Ports available Parallel port Serial port Axis 540+ IPX Network protocol D7e1c200408c5ff6a6 and LPT1 Workstation Click Add. a list of available printers appears Setting Up NetWare Select Network printer and click Next Axis provides two free Snap-ins for iPrint Installing Axis IPP Gateway Configuration Snap For NetWareType TOMCAT33 -STOP Enter Type Nvxadmdn Enter Click on Create Printer Click on iPrint Management on the left paneSelect default drivers for your printer. Click Next and OK Http//IP address of your NW server631/IPP Installing the iPrint Printer on WorkstationChoose the with Installation Wizard option Basic Setup with Axis NetPilotAXIS1A0003LPT1Q Advanced Installation using Axis NetPilot Axis NetPilot Connect NetWare Print Queues window Basic Queue-based printing over IP Installing Axis Network Print ServerPure IP requires that you run NetWare 5 or higher Print Layout Printer StatusNotification Print Tools Adding Printers in UNIX/LinuxClick the Add a new printer button Typical Invocation via a Windows ManagerEdit Printers Typical Invocation from a Terminal Window Invocation Print Queues DebianRed Hat Then finish the wizard in the usual manner DriverSuSE Ftp npserver Axis axinstall ScriptNLPRng is not supported by axinstall Uses industry standard network software on the host Print Methods on TCP/IP NetworksSystems Upgrading the Firmware Updating the FirmwareUpdating the Firmware Obtaining the Software Open a command prompt from Start = RunUsing a Web browser Management and ConfigurationManagement and Configuration Axis 540+/AXIS Management and Configuration Axis ThinWizard interface appears Using Axis ThinWizard for Print Server ManagementAdditional ManagingUpgrading Put config Config Using FTP for Print Server ManagementNot visible ExampleNetwork Print Server using the Telnet protocol Using TelnetAccount Status Using Snmp Axis 540+/AXIS Management and Configuration NetWare AdministrationPrinter Status To examineManagement and Configuration Logical Printers Set the parameter Character Set Conversion to Isoibm PrintersSet the parameter Character Set Conversion to Decibm Click the OK buttonSelect the PR4 tab Printer. All strings are entered as hexadecimal byte valuesSelect the PR1 Web Select the PR2 tab Axis 540+/AXIS Set the Printer Language Translation parameter to Postscr100 Axis 540+/AXIS 101 Select Admin Logical Printers and the PR3 tabSet the Physical Port parameter to LPT2 Click the OK button 102 Axis 540+/AXIS 103 Test ButtonSupported Printers Technical SpecificationSupported Systems Supported ProtocolsSecure Management Wired Network AttachmentsNetwork ManagementDimensions Power ConsumptionSafety EnvironmentalTelnet IndexNdps 38 NDS NetWare Advanced installation Basic installationRestart Setting up NetWare Snap-in for iPrint Network Printer Parameter List 82, 103 password PortsPure IP Queue-based printing Axis 540+/AXIS 109Windows, adding printers
Related manuals
Manual 34 pages 20.57 Kb
Top Page Image Contents