Axis Communications 560, 540+ Printer. All strings are entered as hexadecimal byte values

Page 97

Logical Printers

Adding Strings Before These string functions provide a way to send printer control commands before and After Print Jobs and after each print job. They may be specified individually for each logical

printer. All strings are entered as hexadecimal byte values.

Example:

Assume that the logical printer PR5 is configured as a PostScript printer and that you want to append the PostScript End of File character (hex 04) after each print job.

Follow the instructions below to add a string after the print job:

1.From the print server’s internal Web page, select Admin Logical

Printers.

2.Select the PR5 tab.

3.Enter the string 04 in the String After Print Job text field.

4.Click the OK button.

Example:

You have an HP LaserJet printer with dual trays, and want to print on pre-printed forms when using the logical printer PR4. The standard forms are taken from the lower tray, and the pre- printed forms are taken from the upper tray. The string before print job should contain the command to select the upper tray: EC&l1H (hex 1B 26 6C 31 48). The string after print job should contain the command to select the lower tray: EC&l4H

(hex 1B 26 6C 34 48).

Follow the instructions below to add strings before and after the print job:

1.From the print server’s internal Web page, select Admin Logical

Printers.

2.Select the PR4 tab.

3.Enter the string 1B 26 6C 31 48 in the String Before Print Job text field.

4.Enter the string 1B 26 6C 34 48 in the String After Print Job text field.

5.Click the OK button.

String Substitutions The string substitution function performs search and replace operations on the print data. The primary application is to replace printer control commands. Up to twenty string substitutions may be specified individually for each logical printer.

All strings must be entered as hexadecimal byte values, and each match and substitute string must be preceded by a count byte.

You substitute command strings by editing the String Substitutions (PRx_STR.) parameter.

Example:

Assume that you want to replace the UNIX/Linux New Line (hex 0A) with an Carriage

Return/Line Feed (hex 0D 0A) for logical printer PR1.

AXIS 540+/AXIS 560

97

Image 97
Contents Axis 540+/AXIS Axis 540+/AXIS Network Print ServersRegulatory Information Table of Contents Section Management and Configuration Using a Web browser Advanced Installation using Axis NetPilotUsing Telnet Using Snmp Using Novell Utilities Section Red Hat 7.3 SuSE 8.0Section About Axis Support ServicesAbout this Manual Supported EnvironmentsIntroduction Product Overview Package ContentsAdobe Acrobat Reader software Axis Network Product CDFor Windows For UNIX/Linux Click index.htm Mac OSAxis Physical Description Axis 540+Backside label of print server Windows-based printers ConfigurationManagement On page 87 for detailsFeatures and Benefits Quick overview Basic InstallationConnect the Hardware Follow these steps to make your printer network readyAssignment Assign an IP Address to the Print ServerAutomatic IP address assignment UNIX/Linux performed by editing the file /etc/bootptabUsing ARP Windows 98/NT Me/2000/XP/2003 Using Rarp UNIX/LinuxOpen a Command Prompt and enter the following commands Manual IP address assignmentOpen a Terminal and enter the following commands Using ARP UNIX/Linux and MacUsing Axis IP JumpStarter Click OK to save your settings Making Network Printers available for printing on your PC Installation MethodsAccording to your computer environment Adding Printers in WindowsLPT1 LPT2 Windows 2000/Windows XP/Windows ServerExample 192.168.3.191LPT1 Click Next Adding Printers in Windows Add Printer Wizard. Click Next Close Add/Remove Programs and the Control PanelSelect Protocols Go to Start Settings PrintersAdd TCP\IP Protocol Add Microsoft TCP\IP PrintingPrinter Click Next Installing a NetworkList, click Add Port Overview Axis Print Monitor SoftwareServer Desired printing protocols are running on your clientAxis 540+/AXIS Parallel port Serial port Axis 540+ Ports availableAxis Close the Printer Ports window Ports available Parallel port1 Serial port Axis 540+Adding Printers in Windows Example AX100086.LP1 Adding Printers in Windows Adding Printers in Macintosh Installation in Mac OSChoosing a Printer Installation on MacOS 9.1 or older, using AppleTalkLaserWriter Printer Driver Click the LaserWriter 8.0 icon Bi-directional Support Verifying the SetupAdding Printers in Macintosh 192.168.3.191 Write a text file containing the parameters you want to setIPX/SPX Setting Up NetWareSetup using Ndps Click OK Select TCP/IP default or IPX as network protocol. Click NextIP Address and Port, e.g 192.168.70.243 and LPT1 TCP/IP Network protocolIPX Network protocol 400c 401c 402c D7e1c200408c5ff6a6400cWhen done, select your printer and click Finish AXIS5FF66AIPX1 Log in as AdminSetting Up NetWare Ports available Parallel port Serial port Axis 540+ IPX Network protocol D7e1c200408c5ff6a6 and LPT1 Workstation Click Add. a list of available printers appears Setting Up NetWare Select Network printer and click Next Axis provides two free Snap-ins for iPrint Installing Axis IPP Gateway Configuration Snap For NetWareType TOMCAT33 -STOP Enter Type Nvxadmdn Enter Click on Create Printer Click on iPrint Management on the left paneSelect default drivers for your printer. Click Next and OK Http//IP address of your NW server631/IPP Installing the iPrint Printer on WorkstationChoose the with Installation Wizard option Basic Setup with Axis NetPilotAXIS1A0003LPT1Q Advanced Installation using Axis NetPilot Axis NetPilot Connect NetWare Print Queues window Basic Queue-based printing over IP Installing Axis Network Print ServerPure IP requires that you run NetWare 5 or higher Notification Printer StatusPrint Layout Print Tools Adding Printers in UNIX/LinuxEdit Printers Typical Invocation via a Windows ManagerClick the Add a new printer button Typical Invocation from a Terminal Window Invocation Print Queues DebianRed Hat Then finish the wizard in the usual manner DriverSuSE Ftp npserver Axis axinstall ScriptNLPRng is not supported by axinstall Uses industry standard network software on the host Print Methods on TCP/IP NetworksSystems Upgrading the Firmware Updating the FirmwareUpdating the Firmware Obtaining the Software Open a command prompt from Start = RunUsing a Web browser Management and ConfigurationManagement and Configuration Axis 540+/AXIS Management and Configuration Axis ThinWizard interface appears Using Axis ThinWizard for Print Server ManagementUpgrading ManagingAdditional Put config Config Using FTP for Print Server ManagementNot visible ExampleNetwork Print Server using the Telnet protocol Using TelnetAccount Status Using Snmp Axis 540+/AXIS Management and Configuration NetWare AdministrationPrinter Status To examineManagement and Configuration Logical Printers Set the parameter Character Set Conversion to Isoibm PrintersSet the parameter Character Set Conversion to Decibm Click the OK buttonSelect the PR4 tab Printer. All strings are entered as hexadecimal byte valuesSelect the PR1 Web Select the PR2 tab Axis 540+/AXIS Set the Printer Language Translation parameter to Postscr100 Set the Physical Port parameter to LPT2 Click the OK button Select Admin Logical Printers and the PR3 tabAxis 540+/AXIS 101 102 Axis 540+/AXIS 103 Test ButtonSupported Printers Technical SpecificationSupported Systems Supported ProtocolsSecure Management Wired Network AttachmentsNetwork ManagementDimensions Power ConsumptionSafety EnvironmentalTelnet IndexNdps 38 NDS NetWare Advanced installation Basic installationRestart Setting up NetWare Snap-in for iPrint Network Printer Parameter List 82, 103 password PortsPure IP Queue-based printing Axis 540+/AXIS 109Windows, adding printers
Related manuals
Manual 34 pages 20.57 Kb