Logical Printers
Character Set A common problem in a multiple host environment is that different hosts use Conversion different ASCII character sets. As a result of this, language specific characters
(such as å ü ô ñ) are sometimes printed incorrectly.
The Axis Network Print Server solution to this problem is to assign a character set conversion filter to a logical printer, and then link that logical printer to the host causing the problem.
You select your desired conversion filter by setting the Character Set Conversion (PRx_CSET.) parameter. The output from the conversion filter is always IBM PC Set 2 (Code Page 437), and this is the character set the printer must be set up for.
Example:
Your network contains a host using the character set ISO
In order to direct print jobs to the printer connected to the Axis Network Print Server, you should assign the host to a separate logical printer, and install a character set conversion filter.
Follow the instructions below to change the conversion filter:
1.From the print server’s internal Web page, select Admin Logical
Printers.
2.Select the PR1 tab.
3.Set the parameter Physical Port to e.g. LPT1.
4.Set the parameter Character Set Conversion to ISO>IBM.
5.Click the OK button.
6.Select the PR2 tab.
7.Set the parameter Physical Port to e.g. LPT1.
8.Set the parameter Character Set Conversion to DEC>IBM.
9.Click the OK button.
The ISO
96 | AXIS 540+/AXIS 560 |