BIXOLON SRP-270 service manual General Specifications, Printer Mecha Specifications, Usb

		SRP-270
3-2 General Specifications
Item	Description	Remark
	• SRP-270 : RS-232 Serial Communication
Product	• SRP-270S : RS-485 Serial Communication
	• SRP-270P : IEEE1284 Parallel Communication
	• SRP-270U : USB Communication
Processor	• MITSUBISHI M16C/62 Group M30622 SFP (16 Bit)	External ROM Version
	Internal RAM Size : 3K Byte
Memory	• EPROM : 1Mbits (M27C010)
	• SRAM : 256Kbits (KM62256)
	• Flow Control :	The Flow Control, Baud
Interface Serial	1) DTR / DSR (H/W Flow Control)
	2) XON / XOFF (S/W Flow Control)	Rate, Stop Bit and Parity
(RS-232C / RS-485)
	• Baud Rate : 1200 / 2400 / 4800 / 9600 Bps	are determined by DIP
	• Receive Buffer : 4 Kbytes	S/W position.
	• Connector : DB25P Female (I/F PBA Side)
	• Mode :
Interface Parallel	1) Forward Mode : Compatibility Mode
	2) Reverse Mode : Nibble / Byte Mode
	• Connector : Self-Powered
USB	• Transfer Type : BULK
	• Speed : 12 Mbps (Full-Speed)
	• Power : Self-Powered
Printer	• Printing Method : 9pins Impact Serial Dot
	• Printing Speed : 4.6 Line/Sec
Auto Cutter	• Type : Guillotine
	• Cutting Method : 1 Point Partial Cutting
Power Consumption	• Approx. 24W
AC Adapter	• Input : AC 100V ~ 240V, 50Hz/60Hz
	• Output : DC 24V±5%, 1.5A
Environment	• Temperature : 0℃ ~ 40℃
Condition	• Humidity : 30% ~ 80% RH
Weight	• 3.2 Kg (A Type) / 3.5 Kg (C Type) / 3.6 Kg (D Type)	Packing
	• 2.2 Kg (A Type) / 2.5 Kg (C Type) / 2.6 Kg (D Type)	Unpacking
	• A Type : 160 X 249 X 130
Dimensions(mm)	• C Type : 160 X 249 X 149
	• D Type : 160 X 249 X 160
Reliability	• Head: 300 million dots
	• Printer: 18 million lines (MCBF)
	• Auto Cutter: 1 million cuts
3-3 Printer Mecha Specifications
3-3-1 Printer Mecha Specification
Item	Description		Remark
Model	• SMP-710/SMP-710N
Print Method	• Serial Impact Dot Matrix type (9-Pin Dot)
Printing Direction	• Bi-Direction
Printing Speed	• 4.6 Lines / Sec (9 x 7 Font 40 Columns)
Printing Resolution	• 160(W) x 144(L) DPI
Paper Feeding	• Performed by Step Motor
Paper	• Rolled Paper : W 76±0.5 x Max ø 83mm
Supply Voltage	• 24V ± 10% : Step Motor, Head
	• 5V ± 10% : Home Sensor, Motor Driver IC
Connector	• 30P (Dot Head, Sensor Signal, Motor Control and Power Input)
	• LIFE : Approx.20 Million Print Lines
Head Life	• Approx. 300 million Dots / Wire
Weight	• Under 650g (Excluding Ribbon Cassette, Auto Cutter)

Rev. 3.02 - 18 -