BIXOLON SRP-270 service manual Main-assemblies

					SRP-270
8-8-2 Main-assemblies
8-8-2-1 Base Paper Feed Assy - #1
Name of Parts				Method and Procedure
①BASE PAPER FEED	1.		At first, set ①BASE PAPER FEED in the JIG. Next, insert
②SHAFT TAKE UP			②SHAFT TAKE UP into the hole. Lastly, press it by Lever
③TAPE CUSION			Press.
④RUBBER PLATE (2EA)	2.		Set ③TAPE CUSION to fit rectangular hole of ①BASE
⑤PLATEN ASSY			PAPER FEED and then, insert ④RUBBER PLATE in both
⑥SCREW SPECIAL (M2.6*7.5, 2EA)			side.
⑦SHAFT RUBBER ROLLER	3.		Insert ⑤PLATEN ASSY into the rectangular hole and then,
⑧ROLLER PAPER GUIDE (2EA)			tighten two ⑥SCREW SPECIAL.
⑨BEARING (2EA)	4.		Make ①BASE PAPER FEED stand(right side), and then,
⑩E-RING (ø3, 2EA)			insert two ⑧ROLLER PAPER GUIDE and ⑨BEARING to fit
⑪GEAR ROLLER			⑦SHAFT RUBBER ROLLER in both side one by one. Next,
⑫BRACKET PF R ASSY			fix the Sub Assy into the back face of ①BASE PAPER FEED
⑬STEP MOTOR PF			and fit two ⑩E-RING into the groove each other.
⑭SCREW TAPPING (M3*6, 2EA)		5. Set ⑪GEAR ROLLER onto right side shaft of ①BASE
			PAPER FEED and then set ⑫BRACKET PF R ASSY.
	6.		Insert ⑬STEP MOTOR PF into the rectangular hole of
			BRACKET PF and drag backward. Next, tighten two
			⑭SCREW TAPPING on ⑫BRACKET PF R ASSY.
		<Check Point>
		Check ROLLER to rotate smoothly.

Rev. 3.02 - 78 -