BIXOLON SRP-270 service manual Ribbon Cassette specifications

			SRP-270
8-1-4 Ribbon Cassette specifications
Compatible Model		Color	Ribbon life ("1)
ERC-38	(B)	Black	3 million characters {with continuous printing at 25℃(77°F)}
ERC-38	(B/R)	Black and Red	Black: 1.5million characters {with continuous printing at 25℃(77°F)}
			Red: 750,000 characters {with continuous printing at 25℃(77°F)}

("1) Ribbon life is based on the following conditions: Character font: 7×9 font (with descenders)

Print pattern: ASCII 96-character rolling pattern. See the specification published by SMP-710/710N for the print pattern example.

※NOTE: Malfunctions and other problems may occur if a ribbon cassette other than the specified one is used.

8-1-5 Environmental specifications

Item	Description
	Operating: 0°to 40℃ (32°to 104°F)
Temperature	At 34℃(93°F)or higher, there are humidity restrictions;
	See the figure below.
	Storage: -5°to 50℃(23°to 122°F), except paper and ribbon
	Operating: 30% to 80% RH(non-condensing)
	Storage: 10% to 90% RH(non-condensing),except paper and ribbon
Humidity
	* When packed
	Frequency: 5 to 55Hz
Vibration resistance	Acceleration: 5G
	Sweep: 10 minutes (half cycle)
	Duration: 1 hour
	Directions: x, y and z
	* When packed
	Package: SMP-710/710N standard package
	Height: 60cm(23.62")
Impact resistance	Directions: 1 corner, 3 edges, and 6 surfaces
	* When unpacked
	Height: 5cm(1.97")
	Directions: Lift one edge and release it(for all 4 edges)

Rev. 3.02 - 51 -