BIXOLON SRP-270 ①FRAME Main C/K ASSY-4, ②SERIAL NO. TAG, ③TAPE Insulation, ④LEVER Color Change

					SRP-270
8-8-2-4 Main assembling - #1
	Name of Parts			Method and Procedure
①FRAME MAIN C/K ASSY-4		1. Set ①FRAME MAIN C/K ASSY-4 on the JIG.
②SERIAL NO. TAG		2. Paste ②SERIAL NO. TAG in the right side and ③TAPE
③TAPE INSULATION			INSULATION on the bending line in the bottom face.
④LEVER COLOR CHANGE		3. Grease SHAFT(6 point) with HG-31S.
⑤SOLENOID ASSY		4. Insert ④LEVER COLOR CHANGE into SHAFT in the left
⑥SPRING SOLENOID			bottom side and fit WASHER(2.6*8*0.5).
⑦SCREW MACHINE (M2*3)		5. Turn ⑤SOLENOID ASSY and ⑥SPRING SOLENOID
⑧GEAR PULLEY ASSY			downward and insert it into the hole of LEVER C/C and M/F
⑨WASHER (ø2.6*5*0.5)			side step by step. Next, tighten ⑦SCREW MACHINE.
⑩LEVER TENTION BELT ASSY		6. Insert ⑧GEAR PULLEY ASSY and then, fit ⑨WASHER.
⑪SCREW (M3*4)		7. Insert ⑩LEVER TENTION BELT ASSY to the hole and then,
			tighten ⑪SCREW two-third.

Rev. 3.02 - 81 -