BIXOLON SRP-270 service manual ①RIBBON Frame ②SPRING Ribbon Frame

8-8-2-8 Main assembling - #5

Name of Parts

①RIBBON FRAME

②SPRING RIBBON FRAME

③E-RING (ø3, 3EA)

a

SRP-270

Method and Procedure

1.Insert ⓐSPRING RIBBON FRAME into the hole in left side of ⓑRIBBON FRAME to ward arrow on shows in Fig. 1 detail.

2.Set ⓐSPRING RIBBON FRAME onto the ⓒSHAFT and then, move the RIBBON FRAME toward arrow.

3.Next, insert RIBBON FRAME onto ⓓSHAFT toward arrow an shows in Fig. 3.

4.And then, insert the other hole A of RIBBON FRAME onto ⓒSHAFT and then, adjust the position of RIBBON FRAME to the center as shows in Fig. 4.

5.Firs t E-RING to ⓒSHAFT and two E-RING to ⓓSHAFT.

6.Check RIBBON FRAME to move smoothly as operating it up and down.

Rev. 3.02 - 84 -