BIXOLON SRP-270 ①GEAR Tape UP, ②GEAR TU Pulley, ③WASHER Belt Guide, ⑤BRACKET PF L, ⑦GUIDE Paper a

			SRP-270
8-8-2-2 Base Paper Feed Assy - #2
Name of Parts		Method and Procedure
①GEAR TAPE UP	1. Make BASE PAPER FEED stand (left side), and then, insert
②GEAR TU PULLEY	①GEAR TAPE UP to fit SHFAT(D-CUT) (long side is
③WASHER BELT GUIDE	downward). Next, grease SHFAT and teeth of GEAR with HG-
④WASHER (2.6*5*0.5)	31S.
⑤BRACKET PF L	2. Set ②GEAR TU PULLEY onto SHAFT and insert ③WASHER
⑥SCREW TAPPING (M3*6, 6EA)	BELT GUIDE. Next fix with ④WASHER.
⑦GUIDE PAPER A	3. Set ⑤BRACKET PF L onto BASE PAPER FEED boss, and
⑧GUIDE PAPER B	then, tighten two ⑥SCREW TAPPING.
	4. Rotate BASE PAPER FEED and set ⑦GUIDE PAPER A to
	the back face, and then, tighten two ⑥SCREW TAPPING step
	by step.
	5. Make BASE PAPER FEED stand and set ⑧GUIDE PAPER B
	to it, and then, tighten two ⑥SCREW TAPPING step by step.

Rev. 3.02 - 79 -