BIXOLON SRP-270 service manual Main PCB, Interface Board Assy

SRP-270

5-10 Main PCB

1. Before you disassembly the Main PCB,	2. Remove four screws securing the Main PCB.
you should remove :	Separate the Main PCB from the Main Frame.
- Plate Bottom (see Chapter 4-2)
- Cover Assy (see Chapter 4-3 & 4-4)
- Case Upper Assy (see Chapter 4-6)
- Printer Assy (see Chapter 4-7 & 4-8)

5-11 Interface Board Assy

1.Before you disassembly the Interface Board Assy, you should remove :

-Plate Bottom (see Chapter 4-2)

-Cover Assy (see Chapter 4-3 & 4-4)

-Case Upper Assy (see Chapter 4-6)

-Printer Assy (see Chapter 4-7& 4-8)

2.Remove two screws and take out the Interface Board Assy, as shown below.

Rev. 3.02 - 44 -