Toshiba PROSEC T3H user manual Timer, Link register

Page 33

2. Expanded Functions

2.2.3 Timer

The T3H has 1000 points of timer.

Function type	Type	Address range	Quantity	Expression
	code			example
Timer register	T	000 - 999	1000 words	T670
Timer device	T.	000 - 999	1000 points	T.670

The proportion of the 0.01 s base and the 0.1 s base timers within this 1000 points can be specified by user. This setting information is stored in the system information.

10 ms Timer Range Setting:
T000 - T [	]	User setting (max. 999)

NOTE
T3H internally, the register ranges T000 to T511 and T512 to T999 are
handled separately. Therefore, index modification or table designation
across these ranges are not allowed.
For example)
├─[ T450 TMOV			(100) D1000 ]-		Not allowed
├─[ T450
	TMOV		(62)	D1000 ]-	Allowed
│	TMOV		(38)	D1062 ]-
├─[ T512

2.2.4 Link register

The T3H has 2048 words of link register. This link register is prepared for the TOSLINE-S20 (here called S20).

Function type	Type	Address range	Quantity	Expression
	code			example
Link register	W	0000 - 2047	2048 words	W1500
Link device	Z	0000 - 999F	16000 points	Z847E

The link device Z corresponds to a bit in a link register W. The bit access as Z device is available for the leading 1000 words of W register.

User’s Manual 31

Image 33

Contents USER’S Manual Important Information Hazard Classifications General InformationWiring Safety Precautions InstallationOperation Maintenance Safety Label Terminology About This ManualT3 manuals VacContents Prosec T3H Section T3H Overview Introducing the T3H Differences between T3H and T3 Two types of T3H CPU modules are available T3H components CPU moduleRAM/ROM switch Mode control switchStatus LEDs Programmer port Battery coverComputer link port IC memory card slotExpansion interface module T3H CPU CH1 CH2CPU Power supply module RackExpansion cable Following types of I/O modules are available O moduleModule internal current consumption Data transmission moduleTOSLINE-S20LP AsciiSpecifications Functional specifications SFCRAS Instruction execution speed Tenr TeorTest DtstRST SETTset TrstSIN PID2COS TANInstruction execution speed cont’d Shown below Section Expanded Functions System operation Auto-RUN / Standby selection Timer interrupt intervalSaving the sampling trace condition Expanded registers External I/O registerAuxiliary register Link register TimerLink Global Special register File registerSEND/RECV Expanded FunctionsTOSLINE-S20 Expanded Functions Starting register Expanded file register data read MRADR S T Expanded file register data Write MWExpanded Functions TOSLINE-S20LP loop support Ethernet support Instructions Double-word multiplication and division D∗ Expanded Functions DSV Essential PID PID3Algorithm Control block diagramParameter details ASV ← ISV OperationExpanded Functions Floating point essential PID FPID3 Digital filter PVn = 1− FT⋅ PVC+ FT⋅ PVn − Here ≤ FT ASV differential limit DSV 0 to 100 %/∆ t Data range +1 ⋅C Expanded Functions Expanded data transfer Xfer Type Transfer parameter tableCPU register ↔ Expanded F register IC memory card CPU register ↔ S20/S20LP scan memory CPU register ↔ Eeprom D register When the data writing address range exceeds page boundary MID Network data send SendExpanded Functions S20LP T3H self-station RW100 RW101 RW227 Network data receive Recv Expanded Functions H0A Expanded Functions Prosec T3H Toshiba Corporation