Toshiba PROSEC T3H user manual Transfer parameter table, Type

2. Expanded Functions

Transfer parameter table

	Transfer object	Bank / CH	TYPE	Leading address	Transfer size	Status
						flag
	XW/YW register	0	H00	0 to 511 (T3H)	1 to 256	None
				0 to 255 (T3)
				0 to 63 (T2)
	W register	0	H01	0 to 2047 (T3H)	1 to 256	None
				0 to 1023 (T3/T2)
	LW register	0	H02	0 to 255 (T3H/T3/T2)	1 to 256	None
	RW register	0	H03	0 to 999 (T3H)	1 to 256	None
				0 to 511 (T3)
				0 to 127 (T2)
	D register	0	H04	0 to 8191 (T3H/T3)	1 to 256	None
				0 to 4095 (T2)
	F register	0	H05	0 to 32767 (T3H)	1 to 256	None
				0 to 8191 (T3)
				0 to 1023 (T2)
Expanded F register		1 to 15	H05	0 to 8191 (T3H/T3/T2)	1 to 256	None
(IC memory card) *1		1 or 2	H06	0 to 65535 (bank 1) (T3H)	1 to 256	None
				0 to 57343 (bank 2) (T3H)
S20 scan memory		1 or 2 *2	H10	0 to 1023 (T3H/T3/T2)	1 to 256	Yes *3
S20LP scan memory *4		1 or 2	H10	0 to 4095 (T3H)	1 to 256	None
EEPROM (D register)		0	H20	0 to 8191 (T3H/T3)	Source (read)	None
				0 to 4095 (T2)	1 to 256
					Destination (write)
					1 to 128 (T3H)
					1 to 64 (T3)
					1 to 32 (T2)

*1) Two format types of the IC memory card is available. They are 8 k words/bank (type: H05) and 64 k words/bank (type: H06). Type H06 is available only in the T3H.

*2) Channel 1 (CH1) only for the T2.

*3) The status flag is created only when S20 is designated as transfer source.

*4) S20LP is available only with the T3H. The S20LP does not have the scan healthy map. Therefore status flag is not created for S20LP.

User’s Manual 57