Toshiba B-850 owner manual Transmission Retry

3. PRINTER OPERATION EO1-33029

3.4 Using the B-852 Printer Properties Menus

3.4.3 Details Tab (Cont.)

NOTE:

When clicking on the arrow in

the Print using the

following driver: scrolling text box, a drop down list appears showing all the current drivers installed on the host computer (as in the display at the right), to allow the selection of a different driver from the list.

NOTE:

If problems occur when printing large documents, it may become necessary to increase the value of the

Transmission Retry:

timeout setting.

NOTE:

When clicking on the New Driver button, the same screen as shown above right will appear. However, when clicking on the Yes button, the screen shown at the top of the next page will appear, allowing the installation of an entirely new driver to the host computer.

Select a Different Printer Driver - The Print using the following driver: scrolling text box works with the New Driver... button to add new printer drivers to the PC and to select a different driver from the one currently being used. The current driver will be highlighted in the list.

%￿￿￿￿

Not Selected Timeout Setting Box - Allows entering a value to specify how much time (in seconds) Windows will wait for the printer to be online before reporting an error.

Transmission Retry Timeout Setting Box - Allows entering a value to specify how much time (in seconds) Windows will wait for the printer to be ready to print before reporting an error.

When clicking on any other driver besides the current one from the list, the following screen display will appear.

Clicking on the Yes button will result in the driver being changed, but clicking on the No button will prevent the driver from being changed.

3-13