Toshiba B-850 owner manual Thermal Transfer Print Thermal Direct Print

APPENDIX 4 SYSTEM MODE

EO1-33029

A4.4 Printer Parameter Fine Adjustment

A4.4 Printer Parameter Fine Adjustment (Cont.)

NOTES:

∙ The fine adjustment value

equals the sum of the fine

adjustment values set by the

PC command and this

parameter. The maximum

print tone fine adjustment

value is ±10 (Thermal

Print Tone Fine Adjustment (Thermal Transfer/Thermal Direct Print)

With this parameter you can fine adjust the Print Tone. When “<3>ADJUST SET” appears, press the [PAUSE] key 5 times to enter the Print Tone Fine Adjustment (Thermal transfer print) menu.

721(￿$'-￿￿7!￿￿￿￿ Thermal Transfer

To change the screen to the Print Tone Fine Adjustment (Thermal direct print), press the [PAUSE] key again.

721(￿$'-￿￿'!￿￿￿￿ Thermal Direct

Transfer Print) or +7 and –10

Thermal Transfer Print

Thermal Direct Print

(Thermal Direct Print). When

the value reaches the

maximum, the value remains

unchanged even if the

subsequent fine adjustment is

performed.

∙ This is useful when print tone

is required to be fine adjusted

e.g.) When the ribbon is

changed to different type.

[RESTART]

[FEED]

Darker

721(￿$'-￿7!￿￿￿￿￿￿

721(￿$'-￿7!￿￿￿￿￿

Standard

721(￿$'-￿7!￿￿￿￿￿

721(￿$'-￿7!￿￿￿￿￿

721(￿$'-￿7!￿￿￿￿￿￿

Lighter

721(￿$'-￿'!￿￿￿￿￿￿

721(￿$'-￿'!￿￿￿￿￿

721(￿$'-￿'!￿￿￿￿￿

721(￿$'-￿'!￿￿￿￿￿

721(￿$'-￿'!￿￿￿￿￿￿

[FEED] key: Pressing the [FEED] key one time causes a –1 tone change, up to –10 tones.

[RESTART] key: Pressing the [RESTART] key one time causes a +1 tone change, up to +10 tones.

After completing the fine adjustment, press the [PAUSE] key.

A4-10