Toshiba B-850 owner manual Axis Fine Adjustment

APPENDIX 4 SYSTEM MODE

EO1-33029

A4.4 Printer Parameter Fine Adjustment

A4.4 Printer Parameter Fine Adjustment (Cont.)

X Axis Fine Adjustment (Example)

X Axis Fine Adjustment

With this parameter you can fine adjust the print position on X Axis. When “<3>ADJUST SET” appears, press the [PAUSE] key 4 times.

;￿$'-867￿￿￿￿￿PP￿

[RESTART]

[FEED]

;￿$'-867￿￿￿￿￿￿PP￿ ;￿$'-867￿￿￿￿￿￿PP￿

;￿$'-867￿￿￿￿￿PP￿

;￿$'-867￿￿￿￿￿￿PP￿ ;￿$'-867￿￿￿￿￿￿PP￿

NOTES:

∙The X Axis fine adjustment is performed to fine adjust the print position in horizontal direction (left or right).

∙Adjust the X axis within the effective print range. After the value reaches the coordinate 0, the value remains unchanged even if the subsequent fine adjustment is performed in the negative direction.

∙This adjustment cannot be used in the Self Test mode or Test print.

∙The fine adjustment value equals the sum of the fine adjustment values set by the PC command and this parameter. The maximum X

axis fine adjustment value is

±99.5mm. When the value reaches the maximum, the value remains unchanged even if the subsequent fine adjustment is performed.

[FEED] key: Pressing the [FEED] key one time causes a –0.5mm change, up to –99.5 mm.

[RESTART] key: Pressing the [RESTART] key one time causes a +0.5mm change, up to +99.5 mm.

After completing the fine adjustment, press the [PAUSE] key.

A4- 9