Toshiba B-SX4T Printer Specifications, This section describes the printer specifications, Model

Page 93

6. PRINTER SPECIFICATIONS

ENGLISH VERSION EO1-33058

6. PRINTER SPECIFICATIONS

6. PRINTER SPECIFICATIONS

This section describes the printer specifications.

Model

Item

Dimension (W ⋅ D ⋅ H)

Weight

Operating temperature range

Relative humidity

Power supply

Input voltage

Power During a print job

consumption

During standby

Resolution

Printing method

Printing speed

Available media width (including backing paper)

Effective print width (max.)

Issue mode

LCD Message display

B-SX4T-GS20-QM-R

291 mm ⋅ 460 mm ⋅ 308 mm (11.5” ⋅ 18.1” ⋅ 12.1”)

39.7lb (18 kg) (Media and ribbon are not included.) 5°C to 40°C (40°F to 104°F)

25% to 85% RH (no condensation)

Universal switching power source AC100V to 240V, 50/60Hz±10% AC100 – 240V, 50/60 Hz ±10%

100V: 2.5 A, 130 W maximum 240V: 1.1 A, 138 W maximum

100V: 0.18 A, 11 W maximum 240V: 0.17 A, 20 W maximum

8 dots/mm (203 dpi)

Thermal transfer or Thermal direct

76.2 mm/sec. (3 inches/sec.)

152.4 mm/sec (6 inches/sec.) For details, refer to Section 7.1.1. 254.0 mm/sec (10 inches/sec.)

30.0mm to 112.0 mm (1.2 inches to 4.4 inches)

104.0mm (4.1 inches)

Batch

Strip (Strip mode is enabled only when the optional Strip Module is installed.)

Cut (Cut mode is enabled only when the optional Cutter Module is installed.)

16 characters ⋅ 2 lines

E6- 1

Image 93

Contents SX4T Series Vorsicht CE Compliance for EU onlySX4T Series Waste Recycling information for users For all countries and areas Meanings of Each Symbol Safety SummaryRequest Regarding Maintenance PrecautionsTable of Contents EA2-1 EA1-1EA3-1 EA4-1Product Overview Introduction Features UnpackingNo FM1647000 AccessoriesDoc. No. EO2-33021 Quality Control Report 1 sheetFront View DimensionsRear View Following chaptersInterior Operation PanelOption Name Type Description OptionsSetup Flow Printer SetupProcedure ReferenceInstallation Connecting the Power Cord Fitting the Fan FilterExample of US Type Loading the Media Do not over-tighten the Locking Ring of the Supply Holder Setting the Feed Gap Sensor position Setting the Black Mark Sensor positionRemove the Locking Screw that secures the Media Sensor Batch mode Strip mode OptionSTANDARD/PEEL OFF position Cut mode Option Built-in rewinder mode OptionLoading the Ribbon Auto Ribbon Saving Mode Connecting the Cables to Your Printer Turning on the Printer Turning the PrinterParagraphs outline how to insert Pcmcia cards Pcmcia CardsFollowing Pcmcia cards or equivalent can be used How to enter the System Mode While 2PARAMETER SET is displayed on the LCD Message Parameter SettingTime the Pause key is pressed, the sub menus are displayed SequentiallyUse the Feed or Restart key to select a desired option Character Code SelectionAfter selecting a character code, press the Pause key Character Zero SelectionAfter selecting a baud rate, press the Pause key Baud Rate SelectionData Length Selection After selecting a data length, press the Pause keyStop Bit Selection Parity SelectionFlow Control Code Selection After selecting a language, press the Pause key LCD Language SelectionAuto Forward Wait Selection After selecting an auto forward wait, press the Pause keyFeed key Head Up Cut/Rewinder SelectionSolenoid Type Selection After selecting the solenoid type, press the Pause keyRibbon Saving Function Selection Control Code Selection After selecting the Strip Wait Status, press the Pause key Strip Wait Status SelectionFeed Key Function Selection After selecting the Feed key function, press the Pause keyAfter selecting a Kanji code, press the Pause key Kanji Code SelectionEuro Code Selection After selecting a Euro code, press the Pause keyAfter selecting auto print head check, press the Pause key Auto Print Head Check SelectionCentronics Interface ACK/BUSY Timing Selection After selecting an ACK/BUSY timing, press the Pause keyWeb Printer Function Selection Input Prime SelectionAfter selecting the Input Prime, press the Pause key Expansion I/O Interface Type Selection Ribbon Near End SelectionCentronics Interface Selection Plug & Play SelectionAfter selecting a Plug & Play, press the Pause key Label End/Ribbon End Selection Pre-Strip SelectionAfter selecting the Pre-strip function, press the Pause key Maxi Code Specification Selection Reverse Feed Speed SelectionAfter selecting the Back Feed Speed, press the Pause key System Mode Password Setting Print Head Type SelectionAfter selecting a print head type, press the Pause key After selecting the receive buffer, press the Pause key Dump Mode SettingUse the Feed or Restart key to select a printing method After selecting a printing method, press the Pause keyData in the receive buffer is printed as follows Receive Buffer SizeRequired Label Length When the Pause key is pressed, Basic program is executed Installing the Printer Drivers IntroductionGeneral Description Parallel Interface Installing the Printer DriverWindows 98/Me E2-38 Windows 2000/XP E2-40 USB Interface E2-42 E2-43 E2-44 Finish button E2-46 E2-47 E2-48 Uninstalling the Printer Driver Adding a LAN Port Windows 98/ME Adding/Deleting a LAN PortDeleting a LAN Port Others Printer Driver UpgradesUsing the Printer Driver Print Test AdjustmentWhen using a Strip Module or an optional Cutter Module Feed Amount Fine Adjustment Position and Print Tone Fine AdjustmentCut/Strip Position Fine Adjustment Coordinate Fine AdjustmentWhen setting +0.0 mm Position and PrintTone Fine Example of Cut Position Fine Adjustment Example of Strip Position Fine Adjustment Restart Feed When setting +50.0 mm When setting -50.0 mmPosition and Print Tone Fine Adjustment Ribbon Motor Voltage Fine Adjustment Jam errors Threshold SettingSelect the sensor to be adjusted by using the Feed key Manually setFeed and Pause keys „ When using the Feed Gap Sensor „ When using the Black Mark Sensor„ Manual Threshold Setting „ Storing a No Media Level VoltagePress and hold the Restart or Feed key for about 3 seconds THRESHOLDR4.0V THRESHOLDT4.0V THRESHOLDR3.9V Operation Panel On Line ModeReset OperationPress and hold the Restart key for 3 seconds or longer Maintenance CleaningPrint Head/Platen/ Sensors Covers and Panels Optional Cutter Module Error Messages TroubleshootingError Messages Problems/Causes Solutions Restart keyMedia has run out Load new media. Then press Error Messages Problems/Cause SolutionsMedia is slack Take up any slack in the media Ribbon has run out Load a new ribbon. Then pressPossible Problems Possible Problems Causes SolutionsRibbon is not loaded properly Load the ribbon properly Cutter blade is dirty Clean the cutter blade Refer to .1 Media⇒Section Removing Jammed Media Printer Specifications This section describes the printer specificationsModel SX4T-GS20-QM-R Media Supply SpecificationsMedia Type LabelDetection Area of the Transmissive Sensor LabelTag paper with square holes Effective Print Area Detection Area of the Reflective SensorRfid Tags „ B-9704-RFID-U1-US-R and B-9704-RFID-U1-EU-R„ B-9704-RFID-H1-QM-R Media feed direction Ribbon Recommended Media and Ribbon TypesMedia type Description Ribbon type Description Care/Handling of Media and RibbonCombination of Media and Ribbon Media type Vellum paper and labelAppendix 1 Messages and Leds Symbols in the messageWrong password was entered Printer is waiting for a password to Be enteredBase LAN Board is being Initialized Printer did not succeed in writingFollowing message appears Parallel interface Centronics Standard Appendix 2 InterfacePIN ConnectorSerial interface Standard LAN cable Physical Layer100BASE-TX UTP category Cable length Segment length Max mExpansion I/O Interface Option B-7704-IO- QM-R RFID-U1-EU RFID-U1-USRFID-H1-QM SX704-RFID-U2-US-RAppendix 3 Power Cord When purchasing the power cordAt least, 125% of the rated current of the product Appendix 4 Print Samples JAN13, EAN13 Interleaved 2EAN13+2 digits EAN13+5 digitsIndustrial 2 UPC-A+5 digitsCustomer bar code KIX CodeAppendix 5 Glossaries Device used to remove labels from the backing paper See Black mark sensorMedia and ribbon See Feed gap sensor3-1, A1-1 IndexIndex Waste Recycling information for users EO1-33058E