Toshiba B-SA4T installation manual With the Feed or Restart key

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

(Revision Date: Jan. 19, 2006)

6. Real Time Clock: B-SA704-RTC-QM-R

		(Continued from the
10. Pressing the [PAUSE] key enables setting the		previous page)
Hour.
				PAUSE
11. Set the Hour with the [FEED] or [RESTART]
		<8>RTC SET
key. Pressing the [PAUSE] key fixes the Hour
						FEED	RESTART
and cause the cursor to move to the Minute.		TIME H	00/00/00
12. Set the Minute with the [FEED] or [RESTART]		Hour		PAUSE
key.	Pressing the [PAUSE] key fixes the					Minute
Minute and cause the cursor to move to the
		<8>RTC SET
Second.						FEED	RESTART
		TIME M	10/00/00
13. Set the second with the [FEED] or [RESTART]
key. Press the [PAUSE] key to fix the Second.				PAUSE
Then, the Low Battery Check selection screen						Second
is displayed.
		<8>RTC SET
						FEED	RESTART
14. Pressing the [PAUSE] key enables choosing		TIME S	10/30/00
whether to activate the low battery check
				PAUSE
function or not. Set the function to ON or OFF
with the [FEED] or [RESTART] key.
		<8>RTC SET
ON:	Low battery check function is activated.
		LOW BATT. CHECK
OFF: Low battery check function is not
	activated. (Default)			PAUSE
Press the [PAUSE] key to fix the setting. Then,
the RTC Data Renewal Timing setting screen is		<8>RTC SET				FEED	RESTART
displayed.		LOW BATT. OFF
15. Pressing the [PAUSE] key enables choosing
				PAUSE
the RTC data renewal timing.
16. Choose PAGE or BATCH with the [FEED] or		<8>RTC SET
[RESTART] key.		RENEWAL
PAGE:	A real time can be printed on each
				PAUSE
	media. However, the printer needs to
	stop the motion before printing each
		<8>RTC SET
	media to read the real time clock data.					FEED	RESTART
BATCH: Batch print is possible. However, the		RENEWAL BATCH
	same time is printed on the all media
				PAUSE
	issued in a batch because the real
	time clock data is read only for the first
	media.	<8>RTC SET
Press the [PAUSE] key to fix the setting. Then,		DATE	06/03/01
the current date is displayed.
				FEED	RESTART
17. Press the [FEED] and [RESTART] keys at the
same time to return to “<8>RTC SET” display.
		<8>RTC SET

<Supplementary Explanation>

1.Be sure to load the battery and set the low battery check function to ON whenever the real time clock is used. If the battery is not loaded or the battery voltage is low, the real time clock data is erased at the power off time.

2.When the low battery check function is set to ON and if the battery voltage is 2.4V or less, the printer will result in a “LOW BATTERY” error and stop at the power on time. In that case, hold down the [RESTART] key to restore to “<1>RESET” display.

3.When “LOW BATTERY” error has occurred, contact the nearest TOSHIBA TEC service representative for replacement of the battery.

4.If you would like to keep using the same battery even after “LOW BATTERY” error occurs, set the Low battery check function to OFF, and set the date and time to the real time. As long as the power is on, the Real Time Clock will function. However, once the power is turned off, the date and time will be reset. Then, please ask for the battery replacement.

6- 6