Toshiba B-SA4T installation manual From the previous 3132333435363738 39304142 0A

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

(Revision Date: Feb. 25, 2008)

8. RFID Module: B-SA704-RFID-U2-EU-R

Continued from the previous page

3132333435363738

39304142 (0A)

[FEED], [RESTART]

<10>RFID

Read data is displayed.

Data in parentheses ( ) is the AGC value expressed in hex. code. Write down this value.

Press the [FEED] and [RESTART] keys to return to the RFID Setting Menu (”<10>RFID”).

3)Set an AGC threshold of data write.

Set a value which is lower than the AGC value obtained by a read test by 1 or 2, taking variation of RFID tags in performance into consideration.

Example

<10>RFID

[PAUSE]

<10>RFID
Q VALUE	2

[FEED] or [RESTART]

<10>RFID
Q VALUE	2

When ”<10>RFID” is displayed, press the [PAUSE] key until the Q value setting menu is displayed.

Choose “2” with the [FEED] or [RESTART] key.

When “2” is already chosen, go to the AGC threshold for data write setting menu.

	15
	•
[RESTART]
	•
	2 (Default)
[FEED]	•
	•
	0

[PAUSE]

<10>RFID
WT AGC	11

[FEED] or [RESTAT]

<10>RFID
WT AGC		9
	[PAUSE]
<10>RFID
WT MIN AGC		11

[FEED] or [RESTAT]

<10>RFID

WT MIN AGC 9

[PAUSE]

<10>RFID

Press the [PAUSE] key.

AGC threshold for data write setting menu is displayed.

Choose a threshold value (decimal number) with the [FEED] or [RESTART] key.

When the measured AGC is 10 (0A), for example, choose “9” (a value lower than the measured AGC by 1 or 2).

		15
		•
[RESTART]
		•
		11 (Default)
	[FEED]	•
		•
		0

Press the [PAUSE] key.

AGC threshold lower limit for retry setting menu is displayed. Choose a lower limit (decimal number) with the [FEED] or [RESTART] key.

Usually, choose the same value with the AGC threshold for data write (WT AGC).

	15
	•
[RESTART]	•

	11 (Default)
	•
[FEED]	•
	0

Press the [PAUSE] key.

RFID Setting Menu (”<10>RFID”) is displayed.

An AGC threshold setting is completed.

8- 17