E6581373
6.6.13. nvoDrvEnergy (Cumulative Input Energy)
Output network variable,
SNVT type: SNVT_elec_kwh_l (146)
It provides the cumulative input energy calculated by the inverter.
-Valid range: 0.0kWh to 42949672.9kWh (If an overflow occurred, the value returns to 0.)
-Unit: 0.1kWh
*How to clear the value
This cumulative data value is cleared if the inverter power source is cycled with setting the parameter f748 to 0. When clearing it without cycling the power source, use inverter parameter fa20. Refer to section 7.5 ”Parameter access method” for detail.
6.6.14. nvoDigitalInput (All Digital Inputs Monitor)
Output network variable (Reserved) SNVT_type: SNVT_state (83)
It provides all states of the inverter logic input terminals. Each bit is set to “1” when the terminal is activated. Bit field is arranged as the table shown in below.
Bit | LIU007Z |
0 | |
1 | |
2 | |
3 | |
4 | |
5 | |
6 | |
7 | |
8 | |
9 | |
10 | |
11 | |
12 | |
13 | |
14 | |
15 |
LIU006Z
Under Development
6.6.15. nvoDigitalIn1 to 8 (Digital Input Monitor)
Output network variable SNVT type: SNVT_switch (95)
They provide the inverter logic input terminal state. - Status
nvoDigitalIn1 to 8 | Status | ||
value | state | ||
| |||
0% | 0 | Input OFF | |
100% | 1 | Input ON | |
- 30 -